Examples of 'screwdriver to turn' in a sentence
Meaning of "screwdriver to turn"
screwdriver to turn - This phrase suggests the use of a screwdriver tool to perform a turning or twisting action, typically for tightening or loosening screws. It implies a mechanical or manual task that requires the use of a screwdriver for rotational movement
How to use "screwdriver to turn" in a sentence
Basic
Advanced
screwdriver to turn
Use flat blade screwdriver to turn valve.
Use a screwdriver to turn the High Flame Set Screw clockwise approximately 90 degree.
You must use a flat head screwdriver to turn the cams.
Use a flathead screwdriver to turn the screw in the counterclockwise or clockwise direction.
Remove the control knob and use a thin bladed screwdriver to turn the.
Use a coin or a screwdriver to turn the buttonhole adjuster.
The Doctor reluctantly gives her his sonic screwdriver to turn the inhibitor on.
Use the screwdriver to turn the setscrew clockwise until it totally disengages from the spindle.
Use a small flat-blade screwdriver to turn the adjustment.
Use a screwdriver to turn the chain tensioning screw Fig. 5.
Before playing, please use a screwdriver to turn the transit screw in.
Use a suitable screwdriver to turn this transit screw clockwise IMPORTANT.
To adjust the gain level, use a small screwdriver to turn the control.
Use a flat-blade screwdriver to turn the screw clockwise and loosen it.
To adjust the supply rate, use a small screwdriver to turn the adjusting screw.
See also
I used a screwdriver to turn the screw, but it just did not want to turn.
Use a flat-blade screwdriver to turn the high flame.
Use a screwdriver to turn the tracking screw 1/4 turn.
To RAISE the set - point use a small screwdriver to turn the adjuster CLOCKWISE, Fig 10.
Use a screwdriver to turn LEVEL ( MIN / MAX ) fully to MIN.
Why its cool, Use a Sonic Screwdriver to turn on your computer!
Use a flat-blade screwdriver to turn the high flame setscrew counterclockwise approximate 90 degree.
Sonic Switch, Use a Sonic Screwdriver to turn on your computer!
Use a flat-blade screwdriver to turn the high flame setscrew counterclockwise approximate 90º.
To LOWER the set - point use a small screwdriver to turn the adjuster ANTI CLOCKWISE, Fig.11.
Use a flat-blade screwdriver to turn the battery compartment cover 90 counter-clockwise and remove the cover.
Use a small flat blade screwdriver to turn the control clockwise to increase gain.
Use a small, flat screwdriver to turn the channel selector to the desired position ., Parent unit.
Use a small flat-blade screwdriver to turn the adjustment screw clockwise until tight.
Use a small screwdriver to turn the rotary switch ( 11 ) to another position.
Use a small screwdriver to turn the control SQUELCH ( 13 ) counter-clockwise to the stop.
Use a small screwdriver to turn the control SQUELCH ( 7 ) clockwise to the position “ MAX SENSITIVITY ”.
You'll also be interested in:
Examples of using Screwdriver
Show more
Use a screwdriver to loosen the air shutter
Always take away the screwdriver or similars
Use a screwdriver to secure all wiring connections
Examples of using Turn
Show more
Persuade him to turn over a new leaf
Now turn around and meet him
The unit does not turn on when installed
