Examples of 'screwdriver to tighten' in a sentence
Meaning of "screwdriver to tighten"
Screwdriver to tighten is a phrase that denotes the tool used to fasten or secure screws. It refers to a specific type of screwdriver that is suitable for tightening or adjusting screws by applying rotational force
How to use "screwdriver to tighten" in a sentence
Basic
Advanced
screwdriver to tighten
Use screwdriver to tighten screws into place.
Then use a Phillips Head Screwdriver to tighten the bolts.
Use a screwdriver to tighten and secure the bracket into place.
If necessary, use a tool such as a long handheld screwdriver to tighten it.
Use a screwdriver to tighten the screws.
Attach the pedestal to the scanner using a flat-blade screwdriver to tighten the captive screws.
Use a screwdriver to tighten the screw.
Use a 4mm openend wrench or pliers and 1 Phillips screwdriver to tighten the hardware.
Use the screwdriver to tighten the screw securely.
Use a 4mm nut driver and 1 Phillips screwdriver to tighten the hardware.
Use the screwdriver to tighten the presser foot holder.
Use an appropriate screwdriver to tighten the terminal screws.
Use a screwdriver to tighten clamping screws against the bottom of the countertop.
Use the correct screwdriver to tighten the terminal screws.
Use a screwdriver to tighten the clamping screws against the underside of the countertop.
See also
Use the Phillips screwdriver to tighten the captive screws.
Use the oval screwdriver to tighten the presser foot holder screw securely.
Use a suitable Philips screwdriver to tighten the screws not supplied.
Use the screwdriver to tighten the Locking Screw, if necessary.
Use a 1 Phillips screwdriver to tighten the screws.
Use a Phillips screwdriver to tighten the elevator centering screw.
Use a 2 Phillips screwdriver to tighten the screw.
Use a Phillips screwdriver to tighten the dog ears against the inside of the wall.
Use a small Phillips screwdriver to tighten the gimbal centering screw.
Use a 1 Phillips screwdriver to tighten the screws securing the servo to the mounting blocks.
Use a long, flat-bladed screwdriver to tighten the barrel nut securely.
Use a HAND screwdriver to tighten screws instead.
Use a small Phillips screwdriver to tighten or loosen the screw for friction strip.
Use a flat-blade screwdriver to tighten the screws against the.
Use a Phillips screwdriver to tighten to a snug, secure fit.
Use a 1 Phillips screwdriver to tighten the screws securing the spoiler.
Use a 1 Phillips screwdriver to tighten the screws securing the elevator servo.
Use a 1 Phillips screwdriver to tighten the screw holding the arm to the servo.
Use a 2 Phillips screwdriver to tighten the screws attaching the mount to the motor.
Use Flat-Head Screwdriver to tighten height rod to scale from the back see diagram 6b.
Use a long, flat-blade screwdriver to tighten the barrel nut securely.
You'll also be interested in:
Examples of using Screwdriver
Show more
Use a screwdriver to loosen the air shutter
Always take away the screwdriver or similars
Use a screwdriver to secure all wiring connections
Examples of using Tighten
Show more
Tighten the screw through the clips
I will just tighten these up for you
Tighten properly the connection block screws
