Examples of 'screws and washers' in a sentence
Meaning of "screws and washers"
screws and washers: This phrase typically refers to hardware items used in construction or assembly to fasten or secure components together
How to use "screws and washers" in a sentence
Basic
Advanced
screws and washers
Use four screws and washers when.
Also when fastening by two screws and washers.
Use screws and washers in the delivery condition.
Lower mounting screws and washers.
Screws and washers removed from valve bracket.
Bracket and caster fastening screws and washers.
Retaining screws and washers location.
Realign handle as shown and replace screws and washers.
Fastening screws and washers for sanding bench.
Fasten hood onto cabinet with screws and washers provided.
Screws and washers for camera.
Insert plugs in holes where screws and washers were removed.
Screws and washers.
Secure guard to drill with screws and washers supplied.
The screws and washers included with the submounting brake resistor.
See also
Fit the guard using the three screws and washers.
Remove seven screws and washers holding diffuser to seal plate.
Properly fasten the housing using suitable screws and washers.
The screws and washers are already attached to the base of the insert.
Mount the manifold with the screws and washers supplied.
Screws and washers may be partially screwed into base for shipping purposes.
Replace the four hexagonal screws and washers but do not secure.
Attach the backrest to the backrest frame with four mounting screws and washers.
Remove the two screws and washers from the battery adaptor.
Attach the device to the studs with the screws and washers.
Remove the two screws and washers securing the grill element front support.
Place the cover in position and reinstall the screws and washers.
Install all four mounting screws and washers and tighten securely.
Attach the front support to the frame with four screws and washers.
Use four screws and washers when mounting the amplifi er to the front rack rails.
Fasten the guide rail with four each thumb screws and washers.
Screw the fixing screws and washers partway into the hole shown in the diagram.
Attach the seat to the seat frame with four mounting screws and washers.
Use only the appropri ate wood screws and washers included with your fan.
Use plastic grille and secure to sleeves flanges using existing screws and washers.
B Install the screws and washers as required.
Secure the speaker to the stand with the two supplied screws and washers.
Replace the screws and washers removed in Step.
Mount the arm and bracket using four lag screws and washers provided.
Remove the four screws and washers factory attached to the Auto Clean valve bracket.
The fixture can be mounted with three lag screws and washers which are provided.
Screws and washers for the body-lid mounting.
Now screw the mounting bars to the backplate using small screws and washers.
Secure with the 2 screws and washers provided.
Mount the safe through the top or bottom mounting holes using screws and washers.
Install 4 wall screws and washers into the anchors.
Attach left and right pad sections to board using screws and washers as shown.
Remove 2 screws and washers at the rear of the oven bottom.
Attach the seat handlebar to the seat frame with six mounting screws and washers.
Remove the 3 phillips screws and washers from the pump head.
You'll also be interested in:
Examples of using Washers
Show more
Use washers on both sides of the wall
Place nuts and washers onto bolts
All washers are shipped with engine oil
Examples of using Screws
Show more
The screws are provided in the literature pack
Fully tighten screws with hex wrench
Screws are visible on the burner control panel
