Examples of 'sear burner' in a sentence
Meaning of "sear burner"
sear burner - A type of high-heat burner commonly used in grills for quickly searing the surface of food items to create a caramelized crust while keeping the interior juicy
How to use "sear burner" in a sentence
Basic
Advanced
sear burner
Sear burner cooking grid with hole.
Remove the sear burner cover screws.
Right side shelf with sear burner.
Remove the sear burner mounting screws.
Connect electrical plugs on underside of sear burner.
Move sear burner close to desired outdoor location.
Remove the outdoor sear burner cover.
This sear burner is manufactured for outdoor use only.
Do not lean over the sear burner.
Lift the sear burner out of the grill.
To match light the sear burner.
Gently slide sear burner completely into outdoor enclosure.
Grates are to be in place when using the infrared sear burner.
Open the lid to the sear burner before lighting.
Grate is to be in place when using the infrared sear burner.
See also
Use stainless steel sear burner cover to protect finish from weather.
Do not place briquette trays over the sear burner.
Never close the side burner or sear burner covers when the burner is lit.
Liquid should not come in contact with the sear burner.
Attach sear burner LED light wire to the LED light lead coming from grill body.
Use a wrench to remove the sear burner orifice brass.
Do not clean the burner grate section while in place over the infrared sear burner.
Preheat the infrared sear burner for 5 minutes.
Do not use the smoker box over the infrared sear burner.
Reinstall sear burner, tighten the sear burner orifice brass.
Clean the exterior of the infrared sear burner with a wire.
Place sear burner into outdoor enclosure, but leave enough.
Food spills should be cleaned as soon as entire sear burner is cool.
This built-in outdoor sear burner comes with a power transformer plug assembly for the ignitor system.
Replacing the led battery in the sear burner control knob.
Install the sear burner grease tray ( K ) from the rear of the grill.
Remove all packaging materials and remove sear burner from carton.
Then install the sear burner knob onto valve stem Figure 2a.
It is recommended that a separate circuit servicing only this sear burner be provided.
Change the Sear burner orifices ( for models equipped with sear burner ) 1.
The gas pressure regulator supplied with this infrared sear burner must be used.
Push and turn the sear burner control knob to the " HIGH " position.
Use Phillips screwdriver to reattach the igniter and sear burner plate.
Outdoor built-in sear burner safety.
Use two or more people to move and install built-in sear burner.
Slide open the right side table, insert the sear burner grate.
Using a wrench to tighten, connect the gas supply to the sear burner.
A grounded, 3-prong outdoor outlet located to the left of the sear burner is required.
Remove the pre-attached screws from the sear burner.
To avoid weather damage to finish, use stainless steel sear burner cover.
Lighting the main burners, side burners & sear burner.
