Examples of 'seat shell' in a sentence
Meaning of "seat shell"
A seat shell is a term commonly used in the context of seating design and construction. It refers to the rigid structure or frame of a seat, typically made of a durable and supportive material such as plastic or fiberglass, which forms the foundation for the cushions, upholstery, and other components of a seat
How to use "seat shell" in a sentence
Basic
Advanced
seat shell
The seat shell is available in black or light grey.
Provisions are made on the side of the seat shell.
Tilt the seat shell forward until it engages.
Provisions are made on the rear of the seat shell.
Tilt the seat shell far forward and hold on to it.
Provisions are made on the bottom of the seat shell.
Reinforced steel inner seat shell increases structural integrity.
Guide members are provided to guide the seat shell.
The durable plastic seat shell is easy to wipe and keep clean.
Remove the cover from the child seat shell.
Make sure that the back seat shell is clicked in place correctly.
Insert elastic at back of canopy into channel on seat shell.
Ensure that the seat shell does not tilt back automatically danger of injury.
You must not oil or lubricate any part of the seat shell.
Seat shell made of plastic with flexible slats, fully encased in padding and upholstered.
See also
Fit the child seat cover around the child seat shell.
Push the seat shell against the base until it engages on both sides „ click “.
The backrest fixation bracket enables the seat shell to be fixed to the back.
Guide the buckle retainer down through the slot in the child seat shell.
Seat shell upholstered, fabric Seat shell upholstered, leather.
Or the top of the ears are above the top of the child seat shell.
The seat shell ( 18 ) has been locked into the correct position.
Now you can see the central belt adjuster in the seat shell.
The seat shell 102 can have a generally oblong or square shape.
Guide the buckle retainer up through the slot in the child seat shell to remove.
The seat shell 24 also contains a recessed seat 92 shaped to accept a biasing spring 62, preferably a compression spring.
The moulded components made of cork based composite material may be fixed on a seat shell.
Pull the recline handle ( Fig . E ) then slide the child seat shell into the desired position.
Child seat shell ( Fig . A ) or the harness straps are above the child 's shoulders.
The threaded knob is tightened by hand fixing the mounting plate to the seat shell.
In this recline configuration, the seat shell 106 ′ can accommodate a younger child having a smaller body.
You must not remove, dismantle or alter any part of the seat shell.
The latch handle and biasing spring are assembled to the seat shell as previously described.
Figure 1 shows one example for a moulded component 1 which may be fixed on a seat shell 50.
Figure 4B is a schematic view illustrating the construction of a seat shell used in the fourth embodiment ;.
A coil spring 62 is shown received in the integrally molded spring seat 92 of the seat shell 24.
Figure 4 illustrates a preferred embodiment of a seat shell 24 in more detail.
In most situations, the crotch strap 23 is most easily disconnected from the seat shell 16.
Refit the seat and the back seat shell Fig . 2.
The threaded knob 78 is tightened thereby hand fixing the mounting plate 28 to the seat shell 24.
In . below the top of the child seat shell Fig . A.
The pivot axis S of the extension member 240 can extend transversally relative to the seat shell 240.
It can be molded, including molded onto or around the seat shell 24 if desired.
The seat components are contained within a seat shell 30.
You'll also be interested in:
Examples of using Seat
Show more
You drooled on the seat a little though
Seat belts and child restraint systems
Lift the seat from the vehicle
Examples of using Shell
Show more
Shell made from injected thermoplastic resin
All we had was the shell he left behind
Shell design code pressure vessel code
