Examples of 'secant modulus' in a sentence
Meaning of "secant modulus"
secant modulus - this is a term used in physics or engineering to describe a material's resistance to deformation when subjected to stress or strain
How to use "secant modulus" in a sentence
Basic
Advanced
secant modulus
An estimate of the mean value of the secant modulus.
The secant modulus is a measure of the rigidity or stiffness of a material.
The information can be extracted as the Secant Modulus.
The secant modulus values are high in general as compared to the comparative example.
The mean value of the measurements indicates the Secant Modulus.
The secant modulus is somewhat lower for cast films produced from our resin.
The measured properties which are materially diminished are TD Elmendorf tear and secant modulus.
Secant Modulus is an established measure of stiffness for packaging materials.
This method is also known as the Direct IterationMethod or Secant Modulus Method.
The Secant Modulus test was carried out five times in each case on each film.
With the stress-strain curve it was possible to calculate the secant modulus of elasticity.
The Secant Modulus is a measure of the stiffness of a film.
All exhibit very good tensile strength, elongation at break, and secant modulus properties.
Secant modulus of elasticity for short-term loading.
One modular ratio is used for short-term effects, calculated using the secant modulus.
See also
Secant Modulus Secant modulus at 1 % elongation is also obtained from a tensile test.
E E ' c modulus of elasticity effective modulus for concrete secant modulus of elasticity of concrete.
Secant modulus at 1 % elongation is also obtained from a tensile test.
The specimen is extended along its major axis at a constant speed . Secant Modulus.
In this patent specification the Secant Modulus was determined at an elongation of 2 and 10 %.
Low flexural modulus is measured as the 1 % secant modulus.
Figure 8, is a view of a Secant Modulus graph of an existing prestretched film B ;.
For the lengthwise elastic modulus use is made of the 1 % secant modulus.
Secant modulus was measured in accordance with ASTM D882 on slow-cooled compression molded samples.
The flexural modulus is defined as the secant modulus at 1 % strain.
Sample carrier resins, their secant modulus and Shore Hardness are listed in Example 11, Table II.
The inventive multilayer films demonstrate excellent tensile strengths, and 1 % secant modulus values.
Figure 4 depicts the 2 % Secant Modulus CD and MD of the noted films.
Multilayer films of the present invention demonstrate excellent tensile strengths, and 1 % secant modulus values.
Secant modulus is usually higher than 50 MPa.
Preferably the Secant modulus of the un-stretched film is less than 120 MPa.
The secant modulus of elasticity with a relative elongation of 10 % is at least equal to 5.5 MPa.
The Average 2 % Secant Modulus was calculated as follows,.
The 1 % secant modulus was calculated over the initial ( 1 % strain ) linear section of the stress-strain curve.
The average secant modulus ( a good indicator of the stiffness of the rotomolded part ) is 848 mPa.
The 2 % Secant Modulus and the 10 % Secant Modulus are calculated from the data obtained.
Percent secant modulus is measured in accordance with ASTM D882.
You'll also be interested in:
Examples of using Modulus
Show more
Modulus division is only defined for integers
Both have the same modulus of elasticity
The modulus of elasticity depends on the temperature
Examples of using Secant
Show more
So the slope of the secant line is change in y
Secant line looks something like that
Returns the inverse secant of the argument
