Examples of 'section width' in a sentence
Meaning of "section width"
In the context of tires or wheels, it refers to the measurement of the widest point of the tire's cross-section. It indicates the width of the tire from sidewall to sidewall. The section width is an important specification for determining the compatibility and fit of a tire on a specific vehicle, as well as its performance characteristics
How to use "section width" in a sentence
Basic
Advanced
section width
The alignment tyre section width should be.
The section width also is governed by such standards.
The selected tyre section width shall be.
The section width is obtained by means of the following formula.
The alignment tyre section width shall be.
The section width shall be calculated by the following formula.
Light truck tyres with a nominal section width.
Ratio of the section width to section height.
It is calculated by dividing the section height by the section width.
Is the nominal section width in mm.
Section width of a tyre.
The nominal section width.
Tyre section width specifications.
The maximum axial distance between the sidewalls defines the maximum section width of the tire.
External section width with.
See also
Section width mm.
Overall section width.
The section width shall be obtained by means of the following formula.
Mm or of section width.
A continuous strip formed by a calender has a width W substantially equal to the section width Ws.
The selected tyre section width of each alignment tyre shall be.
Theoretical rim, outer diameter and nominal section width of tyres.
The tire has a section width S measured between the sidewall points that are axially furthest apart.
Ratio of section height to section width of tire, or.
Dialog box section Width Defines the width of the variable component.
For preference, the height of a protuberance is minimal at the external section width.
For Section width read Maximum overall width.
S is the theoretical section width expressed in mm ;.
S = section width expressed in mm measured on measuring rim.
Is the nominal section width in millimetres;.
Definitions " Aspect Ratio " means the ratio of its section height to its section width.
The section width is calculated via the following formula:.
Sn, is the nominal section width in millimetres ;.
According to this illustrated embodiment, the insert 15 exhibits a constant shear section width d1.
Is the actual section width in millimetres as measured on the test rim;.
The pneumatic agricultural tire preferably has a section width 600 mm or greater.
The theoretical section width shall be calculated by the following formula,.
The flange-to-flange width of a rim should be a minimum of three-quarters of the tire section width.
S1 is the nominal section width in millimetres ;.
Thus, the inner liner 07 has a width substantially equal to the section width Ws.
S, is the actual section width in millimetres as measured on the test rim ;.
Definitions . " Aspect Ratio " means the ratio of a tire 's section height to its section width.
The overall dimensions, overall section width and outer diameter ;.
Section width (s) overall width.
Annex 5 - Theoretical rim, outer diameter and nominal section width of tyres of certain size designations.
The section width of the protection belt layer is 710 mm.
Proposal for draft amendments to Regulation No. 109 to increase section width tolerances for retreaded tyres.
The nominal section width ( S1 ) . This value must be expressed in mm.
SNominal = Tyre nominal section width.
The letters " IF " before the nominal section width in case of " Improved Flexion Tyre.
You'll also be interested in:
Examples of using Width
Show more
Set the width to suit your personal
Apply a border and select a border width
Overall width depends on the seat width
Examples of using Section
Show more
See following section on who is eligible to run
You will find it in the adult section
The section contains the following provisions
