Examples of 'selection lever' in a sentence
Meaning of "selection lever"
selection lever - A lever or control used to choose or switch between different options, settings, or choices
How to use "selection lever" in a sentence
Basic
Advanced
selection lever
Stitch selection lever is on roll hem.
Accidents can be caused by inadvertently moving the gear selection lever.
Set the mode selection lever to the hammer.
Selection lever for overlocking or roll hemming 2.
Gears may also be preselected when the shift selection lever is in neutral.
A gear selection lever can preferably be a gearshift lever or a rotary selector.
Turn off the engine and place the gear selection lever into neutral.
The water selection lever offers you a choice of three water flow types.
The combination of Hammering / drilling switching lever and Speed / Blow Mode selection lever.
Place the gear selection lever in NEUTRAL.
Two speed ranges can be preselected with the gear selection lever 10.
The gear ratio selection lever is in neutral position or in neutral gear, or.
Speed / Blow Mode selection lever.
FIG . 24 shows a selection lever which is also part of the output element of the linkage.
The control device 5 essentially comprises a gear selection lever 17 and an electronic processor 18.
See also
A selection lever 11 shown in Fig . 2 is arranged in a front portion of the seat 4.
It is further preferred that the gear selection lever is tied into a shift-by-wire system.
To change from one gear to the other, turn the gear selection lever through 180.
With the gear selection lever in NEUTRAL, start the engine.
A high torque steering cylinder 2 is connected between the selection lever 8 and the chassis 100.
Operation of the gear selection lever acts on the interrupters 8 and 10.
In the nominal position of gear selection lever 300 as it is depicted in FIG.
L Check that the selection lever for evacuation / recycle is in the position A - external evacuation . Fig . 8.
Fig . 2 is a lateral elevation of a selection lever of the device of Fig . 1 ;.
In the rest condition, the gear selection lever LC is in a stable, central position.
To remove screws, Set the selection lever to the " Left " position.
When cutting metal the Cutting Action Selection Lever must be set to the ‘ 0 ' position.
To remove screws, set the selection lever ( 5 ) to left rotation.
You'll also be interested in:
Examples of using Selection
Show more
Selection of display in list or tile form here
The print reserve selection screen is displayed
Selection of basal suckers ready for planting
Examples of using Lever
Show more
Do not lift lever during brewing cycles
Lever can be adjusted to a different lever angle by
Open the lock lever to unlock footplate
