Examples of 'setting screw' in a sentence
Meaning of "setting screw"
setting screw - This phrase refers to the process of adjusting or securing a screw in a particular position
How to use "setting screw" in a sentence
Basic
Advanced
setting screw
Setting screw for pBr burner pressure.
Circle setting screw.
In case it is possible to modify the defrost cycle length through its setting screw.
Access to the setting screw is not very convenient.
Securely thighten the cutting depth setting screw 7.
Do not turn the setting screw unnecessarily or too often.
In the case of a liquefied gas connection, tighten the setting screw.
Turn the setting screw with a cross head screwdriver.
Do not turn the pump shaft when the setting screw is not in place.
Do not turn the setting screw beyond the clockwise or anticlockwise stop.
If the indicator does not reach zero, adjust with zero setting screw.
Do not unscrew the hydraulic brake setting screw completely to prevent oil leakage.
The movement radius of the pick-up arm can be adjusted with a setting screw.
Now adjust the internal setting screw until a stable flame is burning correctly.
If the indicator does not read zero, adjust with the zero setting screw.
See also
Ensure that the setting screw is thoroughly tightened after adjusting the wheel guard.
Lower sewing foot pressure Turn the setting screw 1 counterclockwise.
Ensure that the setting screw is thoroughly tightened after adjusting the dust collection cover.
After tightening the upper blade screw ( A ), tighten the setting screw with the pin provided.
Setting screw completely screwed in, Feed roller at maximum speed.
Incorrect setting of setting screw See Preparation.
The setting screw ( 6 ) allows easy adjustment of the trip flow rate as desired.
It is also possible to use a setting screw for fixing in place of the knob 462.
Adjust the setting screw ( 7 ) so that the trigger has the required initial positi.
When changing the insert, first remove the setting screw ( 1 ), turning it counter-clockwise.
Mount the setting screw "C" with its relative nut and lock.
The saw band thickness is corrected with the setting screw 4 Fig . 14.
The barking detection sensitivity setting screw is located under the settings cover 2 see Diagram 1 and 2.
Use the setting screw " C " if any ulterior adjustments are required.
You'll also be interested in:
Examples of using Setting
Show more
I am setting the bar low so we are not disappointed
Adjust the volume setting to an audible level
Setting the running date and time
Examples of using Screw
Show more
Tighten the screw through the clips
Screw the two sections of pole together
Remove the screw on the rear coupler
