Examples of 'shaft diameter' in a sentence
Meaning of "shaft diameter"
shaft diameter: This phrase indicates the measurement of the width or thickness of a shaft, such as in engineering or manufacturing contexts
How to use "shaft diameter" in a sentence
Basic
Advanced
shaft diameter
Chest hairs have a shaft diameter.
Shaft diameter mm.
Double winding installations are possible only where the shaft diameter is very large.
First excavated shaft diameter larger than the diameter of the ring.
The base has a base diameter substantially the same as the shaft diameter.
Ensure the shaft diameter of the accessory is correct for the size of collet.
Of course this presumes knowledge of the shaft diameter and the speed of rotation.
This optimal shaft diameter is actually the minimum diameter which works effectively.
The output shaft load at a specifi ed shaft diameter for the primary output shaft.
The hole is typically shaped like a torus and is slightly larger than the shaft diameter.
Make sure the shaft diameter of the accessory matches that of the collet nut.
Consequently, biopsy depth is less than one half of the shaft diameter.
An increase in the shaft diameter retains the sprung gear retainer in a set forward position.
Thus, head hairs are often long with moderate shaft diameter and diameter variation.
Shaft diameter output shaft were bold, as well as more simple mounting surface.
See also
It is thus possible to realise a shaft diameter having a diameter of approximately 1 mm.
Shaft diameter - the frictional resistance decreases slightly with decreasing shaft diameter.
D2 is established by the shaft diameter plus the cone inner wall thickness.
The instrument of claim 1 wherein said shaft is generally cylindrical and has a shaft diameter.
The largest part of the shaft diameter is D4.
The instrument comprises a generally cylindrical, elongated shaft having a distal end and a shaft diameter.
It looks like a regular shaft diameter of 0.6 meters to a small depression in the ground.
Several experiments with various spearhead sizes and a shaft diameter of 3 cm proved unusable.
What shaft diameter should I consider for machine about an A4 page?
Due to the decreased need for insulation, the catheter shaft diameter can be made smaller.
The shaft diameter is between about 1 and 3 mm, often about 2 mm.
The actuator tube 54 has a diameter substantially equivalent to the internal shaft diameter DI.
ProfiSeal sliding seal bronze shaft diameter 20 mm.
For example, currently used endoscopic clip appliers are about 10 mm in outside shaft diameter.
Ensure the correct Collet ( 8 ) for the accessory shaft diameter has been fitted.
The humerus has in general a strongly expanded upper edge, 2.9 wider than the shaft diameter.
The shaft face 54 has a shaft diameter Dc.
The machine 6 exemplified in Fig . 2A may have a rotating shaft with a certain shaft diameter d1.
Overhangs up to 15 times the shaft diameter.
Can be fitted on all slitter-scorers for the creaser and knife ( minimum shaft diameter 120mm ).
Depending on the collet size, bits and cutters may have a shaft diameter of max . 3.2 mm.
Adjacent distal end 432 is enlarged portion 436 having a diameter substantially greater than the shaft diameter.
Note, Only use combination cutter accessory parts with a shaft diameter of ø 4.8 mm.
The shaft portion 84 may include a threaded outer surface 88 defining a shaft diameter D6.
You'll also be interested in:
Examples of using Diameter
Show more
A change in wire diameter results in changed parameters
Diameter of and pressure in the fire mains
The incoming hole diameter on auxiliary terminal
Examples of using Shaft
Show more
This is the shaft of the pry bar
Shaft seal depends on water for lubrication
Blind hollow shaft or hollow through shaft
