Examples of 'shaft length' in a sentence
Meaning of "shaft length"
shaft length - In engineering or mechanical contexts, 'shaft length' refers to the measurement of the long, narrow portion of a rotating machine, typically used for the transmission of power. It is a crucial dimension in the design and functionality of various mechanical systems
How to use "shaft length" in a sentence
Basic
Advanced
shaft length
Engine shaft length long long long.
Specific marks for each shaft length.
The shaft length plays an important role.
Adjusting the inclination angle and shaft length.
The shaft length can also be adjusted once fitted.
Another key influence in distance is the shaft and shaft length.
Adjust to a suitable shaft length according to the conditions of your boat.
Use tank dimension diagrams and blade diameter to determine shaft length.
Engine shaft length.
This twist of the rotating shaft is increased as the rotating shaft length is longer.
This produces an increased shaft length and hence an increased length actuator.
The outer universal joint allows greater angular changes but not changes in shaft length.
Variable shaft length A deviation of the standard shaft length is possible for all roller series.
There are a variety of probes with different membrane and shaft length combinations available.
Shaft length and reduce processing costs, the geometry of thermal expansion is limited to hanges.
See also
Adjusting the shaft length WARNING.
Thus, the capacity can be varied without changing the gearbox or shaft length.
The overall shaft length will generally be a minimum length of 26mm with coarse thread.
If a larger rod is used, reaming of the entire shaft length may be necessary.
Reduce the shaft length and processing costs, thermal expansion lead to limited geometric changes.
There is no mutual relative twist, only one shaft length twisted against the other.
Are drilled through one side of the shaft 182 along substantially the entire shaft length.
Preferably, the minimum shaft length is not reduced beyond the smallest size naturally identified.
Like voltage, speed, as well as shaft length and shape.
The standard shaft length for a driver is 45 inches.
An aid as claimed in claims 1 to 4 in which the shaft length is adjustable.
The electrode and stylet shaft length L can be equal to the cannula shaft length E+U.
You may also wish to discuss 12 volt or 24 volt and shaft length.
As with many aspects of golf equipment, shaft length is subject to USGA regulations.
The standard shaft length for most outboard engines less than 125 horsepower is 20 inches.
Please observe the maximum shaft length h1 see Table.
Max . permissible motor shaft length Free text - length without decimal places.
Please observe the maximum shaft length " h1 " acc.
What is the minimum shaft length of the bur for the S-11 Surgical Handpiece?
Min. permis . motor shaft length.
These enable balancing of the motor shaft length tolerances and, therefore, compliance with reference dimension “ C ”.
You'll also be interested in:
Examples of using Shaft
Show more
This is the shaft of the pry bar
Shaft seal depends on water for lubrication
Blind hollow shaft or hollow through shaft
Examples of using Length
Show more
Tubing length and elevation difference limits
Cut wire liner at the right length
Only the length of the journey differs
