Examples of 'shaft lock' in a sentence
Meaning of "shaft lock"
This phrase refers to a mechanical device used to lock or secure a shaft, typically in machinery or equipment. It ensures that the shaft does not rotate or move unintentionally
How to use "shaft lock" in a sentence
Basic
Advanced
shaft lock
Release the shaft lock button.
Shaft by hand until it engages the shaft lock.
Large shaft lock button is easy for changing.
Wrench is on the collet nut or the shaft lock is engaged.
Press the shaft lock to prevent spindle rotation when.
Be careful not to press down the shaft lock button.
Press the shaft lock button and rotate the.
Looking superficially similar to the caisson lock is the shaft lock.
Never actuate the shaft lock when the spindle is.
Screw the pad onto the spindle pressing the shaft lock.
Make sure that the shaft lock is released before.
Then unscrew the backing pad while pressing the shaft lock.
Be sure shaft lock is released before the switch is turned on.
Tapered shaft lock.
Such a shaft lock release may be in the form of a switch or button.
See also
Do not attempt to engage the shaft lock while the tool is running.
Press the shaft lock to prevent spindle rotation when installing or removing accessories.
Rotate the diamond wheel while pressing the shaft lock until it engages.
Integrated shaft lock button makes for easy accessory changes.
Rotate the diamond wheels while pressing the shaft lock until it engages.
Do not engage the shaft lock button while multitool is running.
Tighten the hex bolt by turning clockwise while pressing the shaft lock.
Never depress the shaft lock while the saw is.
These shaft lock collars are great for use on acme threaded rod or smooth shaft.
Press the pedal of the main shaft lock to hold the wheel in this position.
Begin to thread the MultiChuck onto the tool shaft while keeping shaft lock button depressed.
Only actuate the shaft lock when the spindle is not.
Shaft lock w Switch lever e Exhaust vent r Inhalation vent.
Loosen left shaft lock the screws A.
Shaft lock To remove the wheel, follow the installation procedure in reverse.
CAUTION, Never actuate the shaft lock when the spindle is moving.
With the shaft lock engaged twist nose cap counter clockwise to loosen the collet nut.
The mounting brackets 1 may be provided with a shaft lock 2 and shaft lock pin 3.
Make sure the shaft lock is released before the switch is turned on.
To loosen the collet nut, 1 Press the shaft lock button.
Make sure shaft lock has released spindle before making cut.
Housing cap 4 carbon brush cover 2 collet nut 5 speed dial 3 shaft lock button 6 on / off switch.
Never engage the shaft lock button while the device is in use.
Button 5 Battery cartridge 6 Battery charger 7 Charging lights 8 Terminal cover 9 Hex wrench 0 Loosen ( counterclockwise ) q Shaft lock w.
Press the shaft lock so that the wheel can not revolve.
The rotor flip arms 31 has a shaft lock 40 attached to each of the arms.
With the shaft lock engaged, loosen the collet nut by rotating it in a counterclockwise direction.
Then depress the shaft lock lever to prevent the shaft from rotating.
Shaft lock screw, on the right fork leg.
Depress and hold the shaft lock button while rotating the collet nut and shaft.
The shaft lock 54 includes a shaft lock pin which extends through the motor housing 22.
Press the shaft lock and screw the backing pad onto the spindle.
Shaft lock 7 Lock nut 8 Depressed center wheel 9 Inner flange 0 Lock nut wrench q.
Press the shaft lock button, hold down and.
Press the shaft lock to prevent shaft rotation when installing or removing the bit.
You'll also be interested in:
Examples of using Lock
Show more
Get this lock off the gate
Lock bowl onto base by turning clockwise
Document digital lock concerns and complaints
Examples of using Shaft
Show more
This is the shaft of the pry bar
Shaft seal depends on water for lubrication
Blind hollow shaft or hollow through shaft
