Examples of 'shaft speed' in a sentence
Meaning of "shaft speed"
shaft speed: The rotational speed of a shaft, typically referring to the rate at which a rotating shaft revolves around its axis
How to use "shaft speed" in a sentence
Basic
Advanced
shaft speed
It occurs at the maximum permissible shaft speed.
The propeller shaft speed are therefore.
As a function of rate of change of transmission input shaft speed.
Output shaft speed is indicative of vehicle ground speed.
Displays the actual shaft speed.
The pump shaft speed is provided by a prime mover.
As a function of transmission input shaft speed.
If the shaft speed is doubled the power draw is tripled.
Power draw increases exponentially if the shaft speed is increased.
The maximum shaft speed must not exceed the specified speed.
Low pressure shaft speed.
Values of two variable references are calculated as functions of input shaft speed.
Mechanical shaft speed.
Mill shaft speed is adjusted to reach the target power and net energy.
This problem is exacerbated when the peripheral shaft speed is increased.
See also
The output frequency for any shaft speed is calculated using the following formula.
Or another speed of the transmission directly linked with the primary shaft speed.
Regulation of shaft speed is manual and uses throttle valve placed beside control panel.
The alternating current phase voltage continues to be monitored to provide alternator shaft speed.
Application to the production of a shaft speed sensor or a wheel speed sensor for a motor vehicle.
Use only blades marked with a maximum operating speed greater than blade shaft speed.
It synchronises engine speed to the input shaft speed for the next gear during shifting.
The PSD set point can be changed on line by changing shaft speed.
This output shaft speed sensor Sout has the lower detection precision for the lower speed.
The power input and PSD can be changed on line by changing shaft speed.
Stirring shaft speed was controlled with a Lightnin Labmaster stirrer motor.
The total residence time in the MHF can be controlled by varying the shaft speed.
High Pressure shaft speed.
DO use only blades marked with a maximum operating speed greater than the blade shaft speed.
The propeller shaft speed in rev / sec are then.
The method of claim 10 wherein said sensor is a transmission output shaft speed sensor.
Woodworking machine work shaft speed is very high, rotating inertia, difficult to brake.
For the correlation between the operating temperature and the shaft speed or supply voltage, see.
First, the shaft speed has a linear relationship with the applied voltage.
Furthermore, there is no indication of relative shaft speed or compressor surge margin.
Within each flow rate, each SGE point is generated by varying the mill shaft speed.
Hence, in practice, the pump shaft speed of the hydraulic pump is maintained substantially constant.
Unfortunately, the current reversal also causes the torque to reverse, and the shaft speed decreases.
The ABS computer examines changes in shaft speed to predict rear wheel lock-up.
In one particular example the onset is at 48 % of the full shaft speed.
Engine speed and / or output shaft speed information preferably is carried on the data link DI.
USE ONLY Blades ( H ) marked with a maximum operating speed greater than blade shaft speed of machine.
The primary shaft speed w c ;.
In a preferred embodiment, said adjustment term is calculated based on generator shaft speed ( wg ).
Self-heating at shaft speed nmax.
The axle shaft speed sensor 41 detects a rotation speed of the axle shaft 7.
The output relay will then de-energize when the shaft speed of the unit approaches zero.
This gave the necessary linear speed ( in poles passed / time ) for a lower rotational shaft speed.
As is well known, output shaft speed ( OS ) is an indication of vehicle ground speed.
To assure proper Governor adjustment, determine correct blade shaft speed ( RPM ) from the adjacent chart.
You'll also be interested in:
Examples of using Shaft
Show more
This is the shaft of the pry bar
Shaft seal depends on water for lubrication
Blind hollow shaft or hollow through shaft
Examples of using Speed
Show more
The speed of the vacuum source shall be
I must have hit speed dial by mistake
Zoom speed is determined by the amount of rotation
