Examples of 'shear strain' in a sentence
Meaning of "shear strain"
shear strain: In physics and engineering, shear strain is a measure of deformation representing the change in shape of a material when subjected to applied forces causing layers of the material to slide past each other. It quantifies the distortion or angular deformation experienced by the material in response to shear stress
How to use "shear strain" in a sentence
Basic
Advanced
shear strain
It is defined as shear stress over shear strain.
Maximum shear strain energy criterion.
The strain may in particular be shear strain.
Shear strain development rate can be estimated as well.
Failure here is defined by the aforementioned shear strain criteria.
Minimum shear strain rate is governed by two factors.
The second part of this work is devoted to the physics of shear strain.
The shear strain is detected by a potentiometer.
The stress state in many practical geotechnical problems is analogous to simple shear strain.
Shear strain is acting parallel to the surface affected by the forging.
Streaming motions and octahedral shear strain contours are presented in graphical forms.
Shear strain has been implicated as one potential initiator of intervertebral disc annulus failure.
The focus is placed on the ice load measurements based on the shear strain difference.
The recoverable shear strain is determined when this differential pressure is returned to zero.
In each increment the ratio between change in volume and shear strain was calculated.
See also
The rheometer measured the shear strain and viscosity corresponding to the shear stress applied.
The viscosity H is measured in terms of the shear stress t and the shear strain Y.
This angle lets us determine the shear strain at any point along the cross section.
Shear strain measurements were performed with a Haake mars.
The vertical axis indicates cross-section shear strain at each position.
Shear strain measurements are performed with a Haake mars.
Similarly, images of other longitudinal and shear strain development rates can be formed.
The recoverable shear strain Sr is obtained from the first normal stress difference.
In this formula EQU4 is the derivative of the shear strain relative to time.
However, the shear strain is constant across the thickness of the plate.
Euler-Bernoulli beam theory does not account for the effects of transverse shear strain.
Shear strain is measured like normal strain, but at the perpendicular plane.
The arrow F indicates the resultant direction of the shear strain of the block 3.
The plastic shear strain may be imposed in any direction, including full reversal.
A minicomputer governs the application of a 1 % peak-to-peak shear strain to the sample.
A shear strain ( > 4 ) is finally applied in the tube thickness.
Key words, soil dynamics, disturbance, shear strain amplitude, in situ testing, shear modulus, time effects.
Relaxation Modulus G ( t ) Using the same geometry, a step shear strain of 1 % is applied.
Thus, the damper shear strain would be in accordance with line 17 of Fig . 4.
It was also intrumented by cameras to assess shear strain field ( 3D-DIC ).
You'll also be interested in:
Examples of using Shear
Show more
I am like a shear genius with these scissors
Mineralization is related to sulphides in the shear zones
K shear wave transducers with transducer frequency
Examples of using Strain
Show more
Strain relief is required for all hardwiring
I guess the strain was just too much
Strain relief connector for electrical cable
