Examples of 'shear resistance' in a sentence
Meaning of "shear resistance"
shear resistance - the ability of a material to withstand shearing forces without significant deformation
How to use "shear resistance" in a sentence
Basic
Advanced
shear resistance
The punching shear resistance of a composite slab at a.
It places with the top varieties for sports shear resistance.
Shear resistance of polyurethane formulations can vary.
One benefit has to do with shear resistance and durability.
Shear resistance of gluelam beams in varying humidity conditions.
An empirical relationship is necessary to quantify the structural part of shear resistance.
Shear resistance increased with increasing of compressive normal stress.
It is possible to deduce therefrom the interlaminar shear resistance of the material.
The shear resistance is a measure of the cohesiveness or internal strength of an adhesive.
Durability is typically measured by both cut resistance and shear resistance.
The shear resistance of soil is provided by friction and interlocking of the particles.
Such adhesives have been found to exhibit exceptional impact shear resistance.
Shear resistance may be a limiting factor for shear walls made of aerated concrete.
V for a width of slab b should not exceed the design shear resistance.
The shear resistance and the voidage fraction variations with the liquid fraction were analysed.
See also
Panels cut out of these sailcloths therefore have poor shear resistance.
The shear resistance measured from the shear tests compared quite well with the model simulation.
This makes it possible to unprecedentedly increase the shear resistance of the cord as a whole.
Thus, shear resistance is substantially affected by the presence of microbubbles.
This frictional resistance will be additional to the shear resistance provided by the sleeve.
The design shear resistance VRd, s is to be determined with shear reinforcement.
Adhesives which are insufficiently crosslinked may tend to exhibit low impact shear resistance.
Su MPa Ultimate shear resistance of the material.
These materials are light and present good mechanical properties of suppleness and shear resistance.
Crosslinking improves the creep and shear resistance of pressure-sensitive adhesives.
As a result, back analysis may overestimate the available shear resistance.
The moment influence on decreasing shear resistance could also be observed comparing L4 and L5 slabs.
Vt ♦ s et line for characteristic shear resistance.
The design shear resistance was determined by according Eurocode 2 and Suomen rakentamismääräyskokoelma B4.
Longitudinal slip failure, shear resistance.
The shear resistance of the invention has the relative value of 24.
Figure 2d shows the effect of annealing on the shear resistance of the coating.
Shear resistance due to mechanisms other than axial resistance of reinforcements, and concrete-to-concrete friction.
Due to the reduced concrete volume, the shear resistance will also be reduced.
Tests performed to establish a semi-empirical basis for determination of the design shear resistance.
Crosslinking by radiation improves the creep and shear resistance of pressure-sensitive adhesives.
The closure as defined in claim 2 wherein the stops are wedge shaped for shear resistance.
This coating passed the shear resistance test, and had a low post-temper haze.
Moreover, these polymers degrade during their use due to their low shear resistance.
Shear resistance of a R.C. wall due to flexural failure.
The larger the numerical value is, the better the shear resistance is, which is favorable.
VRd, c, design shear resistance for no shear reinforcement elements ;.
However, at high oil contents, adhesives of this type have very poor shear resistance.
Sheet resistance, transmittance, emissivity, and shear resistance are measured as in Example 1.
The design shear resistance given by equations (6.4) should be multiplied by the following reduction factor.
Lateral loads from impacting vehicles therefore are resisted by the shear resistance of the tongue 5.
Both wet and dry shear resistance of AS 801 film adhesive was measured.
The collar 39 and connector 51 add substantial strength and shear resistance to the panel.
The pin has shear resistance greater than that of the tie rod 152.
This about 15 times increase of the shear resistance was unexpected.
You'll also be interested in:
Examples of using Shear
Show more
I am like a shear genius with these scissors
Mineralization is related to sulphides in the shear zones
K shear wave transducers with transducer frequency
Examples of using Resistance
Show more
National resistance to the occupation was therefore legitimate
This must result in a resistance value of approx
Resistance to surface damage by fine particles optional
