Examples of 'sheet metal screws' in a sentence
Meaning of "sheet metal screws"
sheet metal screws: Sheet metal screws are fasteners designed specifically for securing metal sheets together or to other materials. They have sharp threads and are self-tapping, making them ideal for use with thin sheet metal
How to use "sheet metal screws" in a sentence
Basic
Advanced
sheet metal screws
Do not use sheet metal screws or other.
Locate and remove the eight sheet metal screws.
Insert four sheet metal screws in the side.
Secure base foot to heater using sheet metal screws.
Obtain sheet metal screws at local hardware store.
When fastening with sheet metal screws.
Do not use sheet metal screws or other fastening devices.
Secure the switch by using the sheet metal screws provided.
Do not use sheet metal screws at the exhaust outlet connection.
Ensure there is no interference from sheet metal screws that connect.
Do not use sheet metal screws at the hood flange connection.
Secure the wallplate to the duct with sheet metal screws provided.
Use sheet metal screws through bottom flange to secure bottom of blower.
Secure with sheet metal screws.
Most types are designed for either machine screws or sheet metal screws.
See also
Secure with the sheet metal screws provided.
Secure the transition flues to the lower bodyback using the sheet metal screws provided.
Remove the sheet metal screws that hold fixture end caps in place.
Attach the transition to existing ductwork with sheet metal screws and duct sealing tape.
Use the sheet metal screws provided to fasten the hood to the fireplace opening.
Drill holes and install the three sheet metal screws on the top of the humidifier.
Secure the chimney connector to the outer end of the sleeve with sheet metal screws.
Fasten all connections with sheet metal screws and certified silver tape or duct tape.
Insert the plain collar into the humidifier port and secure with sheet metal screws.
Secure all joints with sheet metal screws and duct tape to assure an airtight seal.
Secure damper assembly with 2 sheet metal screws.
Fasten all connections with sheet metal screws and tape all joints with certified duct tape.
Replace the gear motor cover and 2 sheet metal screws.
INSTALL three sheet metal screws at every chimney connector joint.
I use the tried & true sheet metal screws.
DO NOT use sheet metal screws when assembling ducting.
Fasten the panel to the door using the 6 sheet metal screws.
Use self-tapping sheet metal screws to mount the handle in the desired location.
Discard damper / duct connector and two black sheet metal screws.
Use self-tapping sheet metal screws to mount the bracket in the desired location.
If mounting to a solid surface wall or ceiling, use the two sheet metal screws.
Remove the three M5 sheet metal screws that hold.
Sheet metal screws & lock washers.
If mounting to drywall, use the two sheet metal screws and two wall anchors.
Remove the sheet metal screws securing the lid to the Q-SYS Core chassis.
Secure the humidifier to the duct with three no. 8 sheet metal screws not provided.
FastenaHconnections with sheet metal screws and tape aHjoints w / certified SHyerTape or Duct Tape.
Fasten the humidifier to the duct using four self-drilling sheet metal screws provided.
Fasten with sheet metal screws 4.
Install transition on top of hood ( if removed for shipping ) with 2 sheet metal screws.
Self-drilling sheet metal screws.
Fasten the lower decorative flue to the hood using ( 3 ) sheet metal screws.
The panel will be held on by 6 sheet metal screws and 2 machine screws.
Extend the upper flue toward the ceiling and secure with ( 2 ) sheet metal screws.
Use the sheet metal screws provided to fasten brackets to fireplace housing see Figure 12, page 3.
You'll also be interested in:
Examples of using Metal
Show more
But there is metal in the electrolyte regulators
It sounds like a wheelchair going down a metal staircase
Plastic or metal foil vent is not recommended
Examples of using Screws
Show more
The screws are provided in the literature pack
Fully tighten screws with hex wrench
Screws are visible on the burner control panel
Examples of using Sheet
Show more
Polycarbonate sheet to protect against direct contacts
We got all type of potential on this sheet
Model information sheet for local communities
