Examples of 'sintering process' in a sentence
Meaning of "sintering process"
The 'sintering process' is a method of creating a solid mass by heating and compacting a powdered material without fully melting it. It is commonly used in industries such as manufacturing and metallurgy to produce objects with improved strength and durability
How to use "sintering process" in a sentence
Basic
Advanced
sintering process
The deposition is followed by a laser sintering process.
The sintering process may be conducted in a particular atmosphere.
Binding is achieved by the aforedescribed sintering process.
Variations of this sintering process may also be used.
Numerical modelling of pulsed electric current sintering process.
After that time the sintering process is completed.
There are numerous possible refinements of the sintering process.
The iron ore sintering process proved particularly noisy.
Your partner for improving your sintering process.
The sintering process results in densification of the calcium phosphate material.
The dielectric material survives the sintering process.
During the sintering process porosity and refractive index increase.
Selective laser sintering process.
The sintering process then follows after removal and drying.
It should burn cleanly in the sintering process to leave no ash.
See also
Subsequent to pressing the obtained pressed body is subjected to a sintering process.
In addition the metal powder sintering process begins at those temperatures.
Many operating variables impact the laser sintering process.
Mathematicalexpressions for effects of sintering process conditions onproduct properties are presented.
After compression the compacted part is subjected to a sintering process.
Continuous gas analysis during the sintering process in an experimental sinter pan.
Wear testing showed the beneficial effects of the sintering process.
The impact ofthe sintering process on the ionic conductivity is also highlighted.
To prepare a balance sheet of the organic emissions in the ore sintering process.
Said sintering process allows high quality and very good tolerances.
A thin layer of seed layer of electroless nickel is applied followed by a sintering process.
In a further phase of the firing process a sintering process of the article takes place.
The presence of intergranular phase is usually desirable as it assists the sintering process.
The sintering process as well as the density of the sintered product are thereby enhanced.
The magnet pole is fixed to the plate caused by the sintering process.
The sintering process in particular may cause shrinkage that is difficult to estimate beforehand.
Similarly a gas phase can be used to promote infiltration and the sintering process.
A primary sintering process follows the forming process after debinding and presintering.
The impregnated porous preforms are preferably heated in an oxygen atmosphere prior to a sintering process.
In the course of the sintering process the density of the pressed body increases drastically.
The sintering was performed without preheating and under vacuum throughout the sintering process.
Graphene degradation during the sintering process at high temperatures could also take place.
The silica beads are expected to retain their shape even after the sintering process.
Iron ore sintering process with reduced emissions of toxic gases by waste gas recirculation.
A tray adapter can be permanently fixed to the porous titanium sleeve through a sintering process.
The sintering process bums out any polymeric binder from the anode shapes.
The mask can be a mechanical frame covering the areas to be isolated during a sintering process.
The hot press sintering process will generally produce higher density ceramic articles.
The inventive heating process is preferably used to carry out the complete sintering process.
In order to facilitate the sintering process the matrix powder must have large surface areas.
Such determination mentioned above suppresses the unshaped refractories from expanding thermally in a sintering process.
During the sintering process the cutting inserts shrink in a manner that is not absolutely determinable.
The process of fluorine doping can be separated from and conducted independently before a sintering process.
The laser sintering process can comprise building a plurality of abutments connected to the same mount.
AlNiCo is produced by either a casting or sintering process.
You'll also be interested in:
Examples of using Process
Show more
The globalization process is intensifying these pressures
Process by which this report has been prepared
Its implementation process includes the following
Examples of using Sintering
Show more
The sintering and pelletisation of iron ore
Laser or electron beam sintering of powdered material
Sintering operation consist basically four phases
