Examples of 'sintering temperature' in a sentence
Meaning of "sintering temperature"
Sintering temperature is the temperature at which a powdered material is heated to a point where its particles adhere together. This process is used to form solid objects from powders. The specific temperature varies depending on the material and desired outcome
How to use "sintering temperature" in a sentence
Basic
Advanced
sintering temperature
The sintering temperature is a function of resin density.
The mold contents are next raised to sintering temperature.
Sintering temperature greatly depends on the material.
The martensite was formed on cooling from the sintering temperature.
Sintering temperature is determined as follows.
The material may be bonded to itself by heating to a sintering temperature.
Thus the sintering temperature is reduced as each layer is deposited.
This is therefore still well above the sintering temperature.
The sintering temperature is preferably higher as the quantity of alumina is increased.
Such processes and parameters include a sintering temperature in sintering processes.
Lowering the sintering temperature of copper thick film conductor using inorganic additives.
Transport rate seems to be slow down when increasing sintering temperature.
This suggested that this sintering temperature caused sufficient ffowability.
They are removed by pyrolysis during the temperature rise to the sintering temperature.
Variations in carbon content and sintering temperature are normally occurring in industrial production.
See also
It appears that more of such microcracking occurs at the sintering temperature is raised.
The sintering temperature will be based on the oxygen reduced niobium oxide used.
It is economically preferable to have a higher sintering temperature for a shorter period of time.
The sintering temperature also has an influence on the behavior of the finished product.
The strength of the material is increased by increasing sintering temperature and time.
An increased sintering temperature increases the polycondensation reaction rate and final state.
Sintering the mixture at sintering pressure and a sintering temperature to a nuclear fuel pellet.
Sintering temperature should be held for a duration effective to sinter the bond components.
It is however preferred that the sintering temperature is chosen to achieve fully densified bodies.
The hot isostatic pressing is carried out a temperature lower than the sintering temperature.
The sintering temperature should be compatible with the maximum sintering temperature of the support.
Polymerization is conducted at a temperature below the sintering temperature of the ethylene polymer product.
The sintering temperature will depend upon the nature of the particles of ceramic material.
This is used to exceed the melting and sintering temperature of the used conductor material.
At elevated sintering temperature the titanium powder is very sensitive to a clean atmosphere during processing.
The fluidized bed polymerization is conducted at a temperature below the sintering temperature of the product.
Time at sintering temperature is determinable empirically with lower temperatures generally requiring longer times.
The fluidized bed polymerizations are conducted at a temperature below the sintering temperature of the product.
Time at sintering temperature is determinable empirically depending largely on the particular sintered body desired.
The process is carried out at a temperature below the sintering temperature of the polymer particles.
The polymer sintering temperature varies with the polymer properties and is particularly sensitive to density.
The temperature chosen typically should be below the sintering temperature of the ePTFE barrier layer.
This difference in sintering temperature presents dimensional control problems during processing of the multilayer structure.
Also, it is possible to lower the sintering temperature during sintering.
The sintering temperature and time are reported in the tables for each example and specimen.
Possible improvements include for example higher sintering temperature and thinning of the first platinum layer.
Figure 4 shows a graph of hardness of the sintered alloys as a function of sintering temperature.
In addition, the sintering temperature is used as control parameter.
A process according to claim 1 wherein said predetermined temperature is said sintering temperature.
With such a trend, the sintering temperature is continuously decreasing.
Sintering temperature production of sintered material at low temperatures by reducing the fuel yield;.
This may be desired, for instance, if the sintering temperature is to be lowered.
Time at sintering temperature was about 1 h.
Zinc oxide ( ZnO ) is a component for lowering a sintering temperature of the glass frit.
However, a low sintering temperature for achieving better processability causes a decrease in the conductivity.
You'll also be interested in:
Examples of using Temperature
Show more
Manufacturer of the separate temperature measuring equipment
Actual temperature below low temperature value
Select the desired temperature with and
Examples of using Sintering
Show more
The sintering and pelletisation of iron ore
Laser or electron beam sintering of powdered material
Sintering operation consist basically four phases
