Examples of 'socket spanner' in a sentence
Meaning of "socket spanner"
This phrase refers to a type of tool used to tighten or loosen nuts and bolts with hexagonal or octagonal heads. It consists of a handle with a detachable socket that fits over the head of the fastener, allowing for torque to be applied
How to use "socket spanner" in a sentence
Basic
Advanced
socket spanner
Tighten the nuts using a socket spanner.
Use the socket spanner in the tool kit.
Shows a schematic view of a fitting end of a socket spanner of the present invention.
Use the socket spanner supplied in the hardware bag to lift the cover up.
Insert the spark plug socket spanner through the.
Socket spanner worn Replace the socket spanner Air regulation adjusted incorrectly Correct air regulation.
Shows a schematic view of a fitting end of a socket spanner of the prior art.
Always use a socket spanner with a shaft that is long enough to allow this.
Fit the trimmer blade accurately using the supplied socket spanner and tighten firmly in position.
Q Insert the socket spanner supplied sufficiently far into the sleeve as shown.
Open the two hex head bolts using a suitable socket spanner and remove the stone holder.
With a socket spanner 7 remove the injectors and re.
Do not insert the spark plug socket spanner in the spark plug hole.
Finally, tighten the securing nut using a socket spanner.
Driver with socket spanner on the screw / nut.
See also
B Square bar does not retain the socket spanner.
Q Turn the socket spanner first to heating-up position open until a stop is detected.
Unscrew the nozzles using a 7 mm socket spanner.
The socket spanner Finally screw the feet caps to the Table foot base8.
To do this you will need a 7 mm socket spanner.
With a socket spanner 7 unscrew and.
To change the packing during general overhaul, please use the socket spanner provided.
With a socket spanner 7 remove the.
Opening for adjusting the column guide, with 6 mm internal socket spanner.
To change the nozzles use the socket spanner SW 8 and a wrench.
Using a 7mm socket spanner unscrew / remove the injectors.
Remove the spark plug using the supplied spark plug socket spanner 35.
Check that the socket spanner is seated securely on the drive shaft item 05.
Release the burner injector ( D ) with a 7 mm socket spanner and remove it.
Position the socket spanner appropriately and turn it 180 degrees.
To mount these, you will need a 10mm socket spanner mounted on an extension bar.
Drill a 6 millimetre hole and use an 11 mm socket spanner to screw the switch into place.
Unscrew the nozzles using a 7 mm socket spanner (see fi gure), and replace them with nozzles.
You'll also be interested in:
Examples of using Socket
Show more
Insert plug into socket and switch on
Inner socket protects cables from damage
And we freed up a socket for a lava lamp
Examples of using Spanner
Show more
Use a spanner to finely tighten the nuts
You are the famous spanner in the works
Spanner says he will not be hard to find
