Examples of 'softening point' in a sentence
Meaning of "softening point"
softening point: This phrase is commonly used in materials science and engineering to refer to the temperature at which a substance or material becomes soft or starts to lose its rigidity. It is often associated with the behavior of polymers and indicates a transition from a solid to a more pliable state
How to use "softening point" in a sentence
Basic
Advanced
softening point
Softening point according to concentration and temperature.
They can also be defined by a softening point or temperature.
The softening point is measured as described previously.
They may also be defined by a softening point or temperature.
The softening point of polyethylene terephthalate is high.
Mercury metering devices for determination of the softening point.
A high softening point resin was produced in good yield.
The viscosity is high and the softening point is low.
The softening point was used as an index.
The final resin usually has a higher softening point.
The measurement of the softening point is effected on these portions.
It also has a low expansion coefficient and a high softening point.
Littleton softening point.
The relaxation temperature is preferably above the vicat softening point.
The temperature is referred to as the softening point of the thermoreversible gel.
See also
The resulting resol resin is a solid having a high softening point.
The lowering of the softening point is likewise undesirable in industrial fibers.
The temperature is generally above the softening point of the polymers.
The softening point of the polymer decreases with a decrease of its density.
For some bonding agents the softening point is given as a range.
The fibrous material may be heated substantially to its softening point.
The measuring method of the softening point in this embodiment will be described.
The adhesive composition is a viscous liquid above its softening point.
The fluxing agents lower the softening point of the glass reinforcement.
The temperature is increased up to values close to the powder polymer softening point.
Heating may occur past a material softening point or melting point.
A resin low in softening point is low in viscosity and stabilizes at lower temperatures.
The plurality of resins is usually different in softening point or melting point.
Higher softening point resins were not characterized as being compatible with the elastomeric midblock.
The plurality of resins are usually different in softening point or melting point.
The softening point of the mesophase pitch is markedly increased by the stabilization treatment.
The temperature is generally above the softening point of the polyolefin.
The softening point is usually determined by the ring and ball test method.
This will vary depending on the softening point of the sample.
The softening point of the eutectic is lower than that of any of the components.
Suitable glass fibers have a softening point near the temperature of use.
The softening point is the temperature at which enthalpy of melting is greater than zero.
Melting usually involves heating above the softening point of the polymer.
If the softening point is utilised pressure may be applied to aid the fusing process.
The last three digits indicate the softening point of the resin.
The softening point is the temperature at which a material softens beyond some arbitrary softness.
Preparation of the masterbatches is accomplished above the softening point of the resin.
The sheet is heated to a softening point and then advanced to a forming station.
The temperature at which the ball drops to the plate is the softening point.
This tends to raise the softening point and to decrease the phase segregation.
The temperature and airflow are maintained until the targeted softening point is achieved.
The plasticizer has a softening point lower than the softening point of destructured starch.
The substrate is heated to temperatures above the softening point of the powder coating.
The softening point of upper layer portion and the lower layer portion was measured.
The coated layer has a lower softening point than the polypropylene core.
You'll also be interested in:
Examples of using Point
Show more
I agree that is the point why we are here
The point is illustrated in the diagram below
Absorbing light to the point of making it palpable
Examples of using Softening
Show more
Softening and refreshing it restores a radiant complexion
My guess is they are softening us up for a major offensive
Softening is best done more gently on low power
