Examples of 'softening temperature' in a sentence
Meaning of "softening temperature"
This phrase is used in the context of materials science and engineering to describe the temperature at which a solid material becomes more pliable or malleable. It is often associated with the point at which a material undergoes a phase transition from a more rigid state to a softer state
How to use "softening temperature" in a sentence
Basic
Advanced
softening temperature
The reactor temperature was below the softening temperature.
A vicat softening temperature of min.
A critical characteristic of hand mouldable materials is their softening temperature.
The dielectric softening temperature is generally close to melting point.
Another approach is to select a polymer with high softening temperature.
The softening temperature is a function of the particular sealant composition.
No time is needed to heat up the plastic to the softening temperature.
The mold is heated to a softening temperature of the material of the sheath.
The reported temperature is this limiting value of softening temperature.
The dopes typically exhibit a softening temperature similar to a thermoplastic material.
The forming temperature is lower than the softening temperature.
The softening temperature of the plastic should be above the highest operating temperature.
The temperature must be maintained at the softening temperature or above.
This results in a lower softening temperature and hence increased tack at room temperature.
The plastification temperature may also be known as plastifization or softening temperature.
See also
The web is dried and heated above the softening temperature of the thermoplastic powder.
The important physical property of the separation layer is a softening temperature.
The laminated sheet has a higher softening temperature than that of a polyvinyl chloride sheet.
The covering does not withstand high temperatures such as the softening temperature of silica.
This evolution of the softening temperature confirms the possibility of using this binder for coating.
It turns out that doping also has the effect of lowering softening temperature.
Like a high softening temperature also a high melting temperature ensures a good extrusion lamination of polymers.
The coated glass is then heated to its softening temperature in order to be curved.
The present invention relates to a roller furnace for heating windows to their softening temperature.
Thermoplastics are polymers that will have a softening temperature and a melting temperature.
The polymer composition has a continuous thermoplastic polymer phase that has a softening temperature.
The acrylic polymers have a relatively low softening temperature and also a relatively low decomposition temperature.
These rupture temperatures are also determined by measuring the ring and ball softening temperature.
The lignin softening temperature can be adjusted downwards after impregnating with different softening chemicals ref.
It is therefore preferred to store the pellets below the softening temperature of the polymer.
Said first polymer phase has a softening temperature close to the targeted PTC transition temperature.
A further requirement of the invention is that the terpolymer has a rather high softening temperature.
The polyethylene material may also have a softening temperature that is greater than a body cure temperature.
The chamber is evacuated while the film is heated to its forming and softening temperature.
Plasticizers act to lower the softening temperature of PVA below the decomposition point.
The harder emulsion particles reduce the tackiness of the pitch and increase the softening temperature.
The polyethylene chains are placed under the softening temperature Tg in amorphous and semicrystalline regions.
Slumping usually occurs some tens of degrees above the onset of softening temperature Ts.
The Vicat softening temperature of test C is much too low to enable practical use.
The shaped preform is then cooled to below the softening temperature of the binder.
Lignin softening temperature after chemical softening,.
The temperature will be typically selected close to the softening temperature of the film polymer.
The vicat softening temperature can be used to compare the heat-characteristics of different materials.
Generally a high TPTT corresponds to a high softening temperature of the material.
During sealing at the softening temperature of the glass, the structure is practically without stress.
Longer thermal durability due to the higher Vicat softening temperature.
Heating the outer surface to a softening temperature of the polymer plastic material ;.
The die drawing occurs at a drawing temperature Td below the polymer composition softening temperature Ts.
However, it is important that the softening temperature of the plastics is not reached.
The outer and core layers have differences in tensile elastic modulus and Vicat softening temperature.
You'll also be interested in:
Examples of using Temperature
Show more
Manufacturer of the separate temperature measuring equipment
Actual temperature below low temperature value
Select the desired temperature with and
Examples of using Softening
Show more
Softening and refreshing it restores a radiant complexion
My guess is they are softening us up for a major offensive
Softening is best done more gently on low power
