Examples of 'speaker connections' in a sentence
Meaning of "speaker connections"
Speaker connections refer to the physical or wireless connections between audio devices, such as speakers, amplifiers, or headphones, and an audio source, such as a computer, smartphone, or media player. These connections enable the transmission of audio signals from the source to the speakers, allowing for sound reproduction or amplification. Speaker connections may include cables, adapters, ports, or wireless pairing methods, depending on the devices being used
How to use "speaker connections" in a sentence
Basic
Advanced
speaker connections
Check the speaker connections and settings.
In case of short circuit at the speaker connections.
Check the speaker connections and placement.
For amplifiers with one set of speaker connections.
Check speaker connections of this channel.
Repeat for the other speaker connections.
Speaker connections are not secure.
Check for proper speaker connections and use an.
This is a sign of a possible short in the speaker connections.
Also the speaker connections.
This amplifier provides two types of speaker connections.
Check speaker connections and verify that all screw connections.
Check all power amp and speaker connections.
Note suggested speaker connections as reflected in the rear panel channel allocations.
Plug assignment of the speaker connections.
See also
Refer to the Speaker Connections section of this manual for detailed instructions.
Use heavy gauge wire for speaker connections.
Make sure that the speaker connections and the configuration match correctly.
Follow the procedure below to check the speaker connections.
There is a hazard of contact at the speaker connections with a dangerous voltage during operation.
Gently increase the volume level and check the speakers and speaker connections.
Check that all amplifier input and speaker connections have been properly made.
Make sure that the amplifier is disconnected from AC power before making speaker connections.
Make sure that your input connections and speaker connections match your selected configuration.
Check speaker connections at amplifier, measure coil impedance.
Check the system phasing by reversing the positive and negative speaker connections on the subwoofer.
Do not electrically connect speaker connections to each other and do not connect to chassis!
Turn the unit OFF and check the speaker connections.
Make the speaker connections using speaker wire that is at least 16 gauge or heavier.
Make sure that your input connections and speaker connections match your system confi guration.
For proper performance, you must maintain this polarity at all speaker connections.
Make sure that your input connections and speaker connections match your selected confi guration.
Switch the amplifier OFF or to STANDBY while changing speaker connections.
Use to loop ( continue ) signal to speaker connections to the left and right main speakers.
Switch the amplifier OFF while changing speaker connections.
The speaker connections are the same as on the Amp+.
There is a problem with one of the speaker connections during MCACC setup.
GX-series amplifiers use the same type of screw terminals for power and speaker connections.
Make sure that your input connections and speaker connections match your selected stereo / mono configuration.
Should this happen, turn the power off and check the speaker connections.
Plug configuration Speaker connections for stereo operation or 2-channel operation.
Left and right sound outputs reversed Check the speaker connections and location.
Notes on making speaker connections < Do not make any connections to any amplifier.
Use RCA cables for audio components except for speaker connections and DOCK jack connections.
SPEAKON speaker connections for stereo operation 9.
Make all the power, signal and speaker connections to the amp.
SPEAKER CONNECTION - These output terminals are individually labeled for proper speaker connections.
For system suggestions, refer to the Speaker Connections section of this guide.
If the PROTECT LED lits up, is a sign of a possible short in the speaker connections.
For system suggestions, refer to the Speaker Connections section of this manual.
You'll also be interested in:
Examples of using Speaker
Show more
Pair your speaker with your device
Wall mounting the rear speaker system
Check your speaker wires and connections
Examples of using Connections
Show more
It shares no electrical connections with the thermostat
Media connections and interfaces are freely accessible
Make sure all the connections have been
