Examples of 'speaker cord' in a sentence
Meaning of "speaker cord"
A speaker cord refers to the cable or wire used to connect a speaker to an audio source, usually an amplifier or a media player. It enables the transmission of audio signals from the source to the speaker, allowing for sound output
How to use "speaker cord" in a sentence
Basic
Advanced
speaker cord
Speaker cord consists of two insulated wires.
Connecting the speaker cord to the speakers.
Speaker cord without terminal cover.
Choosing the speaker cord not provided.
Be sure to take out the slack so that the speaker cord lies.
The speaker cord is not connected securely.
Examples of poor speaker cord connection.
The speaker cord is contacted with the bodywork.
Connecting the speaker cord d supplied.
The speaker cord with the white stripe should be connected.
Connect the included speaker cord to the speakers.
Is the speaker cord of the speaker box on the stand con.
Insert the exposed core of the speaker cord fully.
Route the speaker cord as shown below.
Twist and remove the insulation at the end of each speaker cord before connecting.
See also
Connecting speaker cord to your receiver or amplifier.
Position the speaker box so that the speaker cord is on the left side.
Stripped speaker cord is touching another speaker terminal.
Insert the exposed core of the speaker cord fully into the terminal.
Each speaker cord has its name tag attached to one end.
Insert the end of the speaker cord into the terminal as.
Always use moisture-resistant speaker cord.
Connect the speaker cord to the terminals.
If the speaker now works, the original speaker cord is bad.
Connect the speaker cord to the speaker terminal.
If the speaker now works, the problem is in the original speaker cord.
Connect one speaker cord to your right speaker.
If the speaker now works, the problem was in the original speaker cord.
After check the speaker cord and fixing the.
Turn the surround amplifier upside down, and store the cords in the speaker cord cover.
Insert the speaker cord inside the stand as illustrated.
Use the proper gauge ( thickness ) of speaker cord.
Insert the speaker cord into the speaker terminal.
Be sure to use the proper gauge ( thickness ) of speaker cord.
Do not catch the speaker cord insulation in the speaker terminals.
Speaker cord see “ Choosing the speaker cord ” on page 5.
Insert the end of the speaker cord into the terminal as illustrated below.
Use a speaker cord ( not supplied ) to connect the speaker terminals.
Check and correct the speaker cord connections page 5.
Connect the speaker cord to the speaker terminal of the leg.
In the same manner, connect the right speaker cord to the right channel speaker output.
Pull the speaker cord out of the center of the stand by about 50 cm.
Be sure to match the speaker cord to the appropriate terminal on the components.
Connect the speaker cord to the apparatus and the speakers carefully so as.
Measure the length of speaker cord needed to connect each speaker to your amplifier.
Push the speaker cord cover down until you hear a click.
The bare ends of the speaker cord can be affected by exposure to the elements.
Insert the speaker cord into the speaker terminal inside the leg.
When detaching, remove the speaker cord holder, then remove the speaker cord cover.
Pass the speaker cord through the bottom of the base.
