Examples of 'specified torque' in a sentence
Meaning of "specified torque"
specified torque: a predetermined amount of rotational force required to tighten or loosen a fastener, often used in mechanics or engineering
How to use "specified torque" in a sentence
Basic
Advanced
specified torque
Tighten them to the specified torque if specified.
Tighten screws and mounting fixtures to the specified torque.
Do not exceed the specified torque under any circumstances.
Use a torque wrench and a specified torque.
Please note the specified torque see chapter Torque.
Torque the connectors to the specified torque.
The specified torque (see illustration).
Tighten trim tab bolt to specified torque.
Please note that the screws on stem and handlebars are tightened with a specified torque.
Tighten bolts with the specified torque wrench.
Install the final transmission oil drain bolt, and then tighten it to the specified torque.
Observe installation hints and specified torque when replacing parts.
If the closure is a screw type closure, it is tightened to a specified torque.
Install oil filter and tighten it to specified torque by using oil filter wrench.
After the bottle is filled, the cap is screwed down to a specified torque.
See also
This helps the user tighten screws to a specified torque without damage or over-tightening.
Make sure all the fasteners are tightened to the specified torque.
They should be tightened to the specified torque if specified.
After adjustment, tighten the lock nut to the specified torque.
Install the pivot bolt and tighten to specified torque while holding the nut.
Mounting bolts loose Tighten bolts to specified torque.
Tighten bolts with the specified torque Page 27.
Install the engine oil drain bolt, and then tighten it to the specified torque.
However, the spark plug should be tightened to the specified torque as soon as possible.
The lower nut 61 is tightened with a torque key to obtain a specified torque.
FIG . 8 is a graph illustrating a flow of specified torque output control.
Tighten the connecting screws to the specified torque.
Tighten the axle nut to specified torque.
Tighten the spark plug to the specified torque.
Tighten all screws with the specified torque.
Tighten the four screws with the specified torque.
Tighten the exhaust pipe nuts to the specified torque.
Tighten the flare not with the specified torque.
Each type has the ability to preset a specified torque value.
The impact wrench should be used within the specified torque range.
Re-tighten all wiring terminal connections to specified torque values.
Using the torque wrench, tighten the locknut to the specified torque.
Using a torque wrench, tighten the flare nuts to the specified torque setting.
B, Tighten the bolts to the specified torque.
Weeks after installation Re-tighten power terminal connections to specified torque values.
The key-type chuck must be tightened to the specified torque of 40 Nm.
The quick-release chuck must be tightened to the specified torque of 40 Nm.
Tighten the axle bolt ( 2 ) to the specified torque.
You'll also be interested in:
Examples of using Torque
Show more
The resulting torque introduces the rotation
Torque for terminal box cover screws
Low level inducement torque reduction scheme
Examples of using Specified
Show more
Each address must be specified in a separate line
The specified file will be passed to tester
Time ranges are often specified in the tables
