Examples of 'speed control knob' in a sentence
Meaning of "speed control knob"
Speed control knob is a physical or digital device used to adjust and regulate the speed of a machine or vehicle, such as a knob on a blender or a button in a car
How to use "speed control knob" in a sentence
Basic
Advanced
speed control knob
Turn speed control knob to slowest speed.
Remove the variable speed control knob.
Speed control knob set at zero.
Replace the variable speed control knob.
Set the speed control knob to the desired position.
Turntable spinning speed control knob.
Use the speed control knob to adjust the maximum speed of your chair.
Your grinder is equipped with a variable speed control knob.
The numbers on the speed control knob represent speed ranges.
Planetary food mixer is equipped with a speed control knob.
Ensure that the speed control knob is fully to the left.
Adjust the speed by turning the speed control knob A.
The speed control knob is located on the right hand side of the plenum.
In order to stop the appliance turn the speed control knob to position.
Rotate the speed control knob on the right to select the desired operating mode.
See also
Position 2 of the power control switch also activates a speed control knob.
Only the speed control knob can be used to turn the machine on and off.
Connection to a working power socket is indicated by the speed control knob A9 being lit.
Adjust the speed control knob so the tap turns slowly and smoothly into the hole.
When finished processing the ingredients, PLEASE turn the speed control knob to the OFF position.
Rotate and hold speed control knob to the left to operate Pulse continuously.
The tool speed depends on the variable speed control knob ( 3 ) setting.
Turn the speed control knob counterclockwise to increase blower speed - clockwise to decrease speed.
Gradually increase your speed by turning speed control knob forward Figure 17.
Adjust the speed control knob ( 4 ) and repeat until an optimum level of finish is obtained.
Switch on the machine by gently turning the variable speed control knob ( D ), clockwise.
Dients being mixed, turn the speed control knob clockwise until the desired speed is reached.
Speed Control Knob ( 30 ) is used to control the maximum speed in either forward or reverse.
Before starting, turn speed control knob to slowest setting Figure 17.
Control the speed of traverse by using the traverse speed control knob figure 21, Item C.
Wipe the motor unit, speed control knob and feet with a damp cloth and dry thoroughly.
Control the speed of traverse by using the speed control knob 3 - fi gure 10.
Set the variable speed control knob ( 4 ) to the required speed range.
The grinder is equipped with a variable speed control knob ( A ) Fig . 9.
Gradually turn speed control knob to desired cleaning speed Figure 14.
Variable Speed Control - Set the variable speed control knob ( 3 ) to the required speed range.
Use the speed control knob A9 to set the required speed level from 1 to 6.
To turn off the blowers, turn the fan speed control knob to the “ 0 ” position.
Turn the fan Speed Control knob clockwise to set the Fan at High ( ) or Low.
Simply turn off the variable speed control knob ( D ) and then turn it on again.
Switch the speed control knob 1 or 2, to turn it on.
The PR15-D5 is designed with a manual speed control knob to provide five speeds.
Set the variable speed control knob ( 1 ) to the required.
Switch on the mixing by turning the speed control knob ( 4 ) to adequate position P, I, II.
If the tool has a variable speed control knob ( 8 ), set it to the required speed range.
You'll also be interested in:
Examples of using Knob
Show more
Press the volume knob during a call
Each knob is marked with an alchemical symbol
Turn the thermostat knob to a lower number
Examples of using Speed
Show more
The speed of the vacuum source shall be
I must have hit speed dial by mistake
Zoom speed is determined by the amount of rotation
