Examples of 'speed control lever' in a sentence
Meaning of "speed control lever"
speed control lever: A mechanical device or component in a vehicle or machine that is used to adjust and regulate the speed or rate of operation. It is commonly found in automobiles, engines, and industrial equipment to manage the velocity or movement of the system
How to use "speed control lever" in a sentence
Basic
Advanced
speed control lever
Release the speed control lever completely.
Ground speed should be controlled using the speed control lever.
Place speed control lever in desired position.
Press downward on the speed control lever and move.
Place speed control lever in highest speed position.
Adjust the speed with the speed control lever.
Slide the speed control lever to vary the sewing.
Engines with a blocked lower idle speed can not be switched off with the speed control lever.
The speed control lever does not move smoothly or easily.
Pedal and positioning the speed control lever in desired position.
The speed control lever has to be moved only when the mower is moving.
Rotate the center ring upward on the Speed Control lever to turn the system on.
The speed control lever is located on the right side of the steering wheel.
SPEED and DIRECTION are controlled by the drive speed control lever.
Do not move speed control lever unless engine is running.
See also
Lawn tractors vary by model and are available with either a 6 or 7 speed control lever.
Do not move speed control lever when traction drive control lever is engaged.
For faster bobbin winding, slide the sewing speed control lever to the right.
Do not move speed control lever when trac tion drive control lever is engaged.
Do not push both RH & LH sides of the speed control lever simultaneously.
Always use the speed control lever to slow the ground speed of the lawn tractor.
If the Stand Mixer stops due to overload, slide the speed control lever to OFF.
Move the speed control lever all the way down and into the parking brake position.
Possible causes Remedy Chapter Speed control lever in stop or idle position.
Set speed control lever to a position between START and max.
Possible causes Remedy Chapter Move the speed control lever to the " STOP " position.
Set the speed control lever to the START position.
Make sure the stand mixer 's speed control lever is set to the OFF/0 position.
Move speed control lever to desired position AFTER engaging the traction drive control lever.
The engine will not start unless the Speed Control Lever ( 1M ) is in the STOP position.
The Speed Control Lever is located on the left side of the steering column.
To stop, move the speed control lever to the “ N ” neutral position.
Speed control lever is not at “ RUN ” position.
Release the speed control lever and the clutch-brake pedal.
Move speed control lever to ‘ 1 ' back to the STOP position.
Slowly move the speed control lever in desired “ F ” forward or “ R ” reverse position.
Slide the Speed Control Lever to the desired speed and continue mixing.
Note, The speed control lever is spring - loaded so.
Turn speed control lever to “ RUN ” position.
Tapping the Speed Control lever down ( - ) once will result in a 1 km / h decrease in set speed.
Set the engine speed control lever to position MAX Fig. 6 - point 1.
You'll also be interested in:
Examples of using Lever
Show more
Do not lift lever during brewing cycles
Lever can be adjusted to a different lever angle by
Open the lock lever to unlock footplate
Examples of using Speed
Show more
The speed of the vacuum source shall be
I must have hit speed dial by mistake
Zoom speed is determined by the amount of rotation
