Examples of 'speed of the pump' in a sentence
Meaning of "speed of the pump"
Speed of the pump: Refers to the rate at which a pump operates in moving fluid through a system or process. It is commonly used in engineering, manufacturing, and fluid dynamics to measure the efficiency and performance of pumps
How to use "speed of the pump" in a sentence
Basic
Advanced
speed of the pump
To set the maximum speed of the pump.
The operating speed of the pump can thus be measured during device operation.
Thereby reducing the speed of the pump.
The maximum speed of the pump is specifi ed here.
There is a different pump characteristic for each speed of the pump.
Check the speed of the pump.
Several measuring points can be obtained by causing the speed of the pump to vary.
Sensing the speed of the pump and generating an electrical pump speed signal ;.
Let us increase the speed of the pump.
Speed of the pump Np established at a minimum value Npmin, and.
The motor control signal is preferably configured to control the speed of the pump motor.
Select the speed of the pump during Timer 1.
Generally, said compression strongly reduces the pumping speed of the pump.
It will adjust the speed of the pump so that a frequency of 6 Hz is achieved.
The pump is connected to a microcontroller, which controls the speed of the pump motor.
See also
Speed of the pump Np fixed at the saturation value Nsat, and.
In this way, the maximum rotational speed of the pump may be increased.
The speed of the pump 6 is itself also monitored by the monitoring member 8.
This signal automatically controls the direction of operation and the speed of the pump 17.
The operation speed of the pump ( slow or quick ) can also be set.
The flow rate can be regulated by regulating the speed of the pump 115.
The speed of the pump 130 is preferably proportional to the flow rate therethrough.
As the parameter changes the speed of the pump 12 is changed.
The drive speed of the pump is designed for power take-offs ( PTOs ) of standard trucks.
It results therefrom that, in a hot-starting state, the speed of the pump is not optimal.
The increase of the speed of the pump motor 612 will increase the fluid flow rate.
Thus, the air pressure is adjusted by controlling the rotational speed of the pump motor 14b.
Speed of the pump proportional to a saturation speed, that is to say Np = Nsat.
Move the motor acceleration lever ( G10 ) gently to increase or decrease the speed of the pump.
The speed of the pump is set by the setting of switch 562.
Press High, Medium, or Low to select the speed of the pump during Timer 1.
Speed setting ( Fig . 8 ) The speed of the pump can be adjusted with a 3-position rotary button.
The liquid flow rate is controlled by the speed of the pump 226.
Therefore, the ink delivery speed of the pump 160 is adjusted.
You'll also be interested in:
Examples of using Pump
Show more
Clean the pump at least twice a year
Check that the drain pump is level
However the pump can be activated in commissioning
Examples of using Speed
Show more
The speed of the vacuum source shall be
I must have hit speed dial by mistake
Zoom speed is determined by the amount of rotation
