Examples of 'spindle speed' in a sentence
Meaning of "spindle speed"
Spindle speed refers to the rotational speed of a spindle, which is a component typically found in machines such as lathes, mills, and drills. Spindle speed is measured in revolutions per minute (RPM) and determines the rate at which the tool or workpiece is spun or rotated during machining operations
How to use "spindle speed" in a sentence
Basic
Advanced
spindle speed
Maximum spindle speed for thread cutting.
Configuring nominal values for the spindle speed.
Maximum spindle speed of the spindles of an uptwister.
Override potentiometer for feed rate and spindle speed.
Maximum spindle speed for oriented spindle stop.
Grinding wheel spindle speed.
Spindle speed is with high quality digital readout.
Definition of the maximum spindle speed for thread cutting.
Spindle speed was utilized as the variable test parameter.
Definition of the maximum spindle speed for oriented spindle stop.
The spindle speed data is shown on the cabinet panel.
Work large and unbalanced workpieces at low spindle speed only.
Constant spindle speed of a ring doubling and twisting frame.
Place the belt on the two pulleys according to the needed spindle speed.
Variable spindle speed of a ring doubling and twisting frame.
See also
Ensure that the saw blade is suitable for the spindle speed of the tool.
Maximum spindle speed of a ring doubling and twisting frame.
These numbers do not take any optimisation of the spindle speed into account either.
The spindle speed increases as the pressure on the switch increases.
Handy control knobs allow you to sensitively adjust the feed rate and spindle speed.
Spindle speed can not be achieved with selected gear stage.
Blade wear and spindle current both increased by reducing spindle speed or increasing feed rate.
Work spindle speed.
Machine operating panel with control keys and override potentiometers for feed rate and spindle speed.
Sub spindle speed.
With the handy control knobs you can individually adjust the feed rate and spindle speed.
Variable spindle speed for work on a variety of steel grades and thicknesses.
Definition of the minimum spindle speed Setting range.
Calculate spindle speed and feed rate for the specifi c machining process.
A digital RPM readout allows user to optimize the spindle speed to the application.
And the main spindle speed can be adjusted through the frequency converter.
The RPM Readout shows the spindle speed.
You can control the spindle speed depending on the configuration of the connected machine tool.
Engine speed at recommended max . spindle speed.
The feed rate and spindle speed are decisive for the service life of the bit.
Start-up time for upper spindle speed range.
Adjust the spindle speed ONLY when the machine is in operation.
Start-up time for lower spindle speed range.
The pre-set spindle speed is kept constant electronically.
Before any operation, select the correct spindle speed.
The tool position and the spindle speed remain unchanged when the program run is aborted.
Consult your tool manufacturer 's manual to verify spindle speed ranges per tool.
Setting the spindle speed Setting range.
Spindle Speed can be calculated using the following equation,.
Movements, feedrates and the spindle speed are all shown.
Remember, spindle speed also affects outside diameter holding force.
Furthermore, toroid cutters do not require the higher spindle speed requirements of a ball nose insert.
Below are the spindle speed parameters for your reference ( for engraving different material ).
Maximum speed in thread - The maximum spindle speed used in threading.
Returns the spindle speed limit in revolutions per minute, selected by DNC.
You'll also be interested in:
Examples of using Spindle
Show more
For main spindle drives on machine tools
The valves have an external spindle thread
Spindle probing software functionality comparison chart
Examples of using Speed
Show more
The speed of the vacuum source shall be
I must have hit speed dial by mistake
Zoom speed is determined by the amount of rotation
