Examples of 'spool housing' in a sentence
Meaning of "spool housing"
spool housing - a term that may refer to a component of machinery or equipment designed to contain or support a spool, which is a cylindrical object used for winding or storing material
How to use "spool housing" in a sentence
Basic
Advanced
spool housing
Hold the spool housing firmly with one.
Put the line spool in the spool housing.
Check that the spool housing can rotate freely.
Line still jammed on spool or broken inside spool housing.
Place cutting guard over spool housing at a slight angle.
Remove the tape holding the cutting line to the spool housing.
Place the spool into the spool housing and pull the excess line out.
Pinch the slotted area on the both sides of the spool housing to.
Turn the spool housing clockwise as shown in Figure.
Carefully clean the spool housing.
Check that the spool housing can rotate freely . Carefully clean it if necessary.
Remove the spool and check if the lever in the spool housing.
U Push the cover onto the spool housing until it snaps.
Insert the line end through the appropriate hole in the spool housing.
Remove the spool housing as described in the " Replacing Spool.
See also
Remove the spool and check if the lever in the spool housing can move freely.
Replace spool cover onto spool housing and snap into place . See Figure 29.
Insert screwdriver through each all three holes to prevent the spool housing from turning.
Line up the white nubs 22 inside the spool housing with the recesses 28 of the spool.
U Place the new spool onto the boss in the spool housing.
Appliance runs slowly u Check that the spool housing can rotate freely.
In transit, the cutting line is taped to the spool housing.
Clean grass and other debris from the spool and spool housing using a brush See Figure 24.
Now remove the Tap'n go button 4 and then the used-up spool 3 from the spool housing.
Ff Remove battery from tool . ff Check that the spool housing can rotate freely.
Remove any dirt or grass that may have collected inside the spool housing and cover.
Remove the spool cover and spool f rom spool housing See Figure 23.
The line should protrude approx . 11 cm from the spool housing.
Push the spool disc into the line spool housing see fi g. 12f.
Align the spool cap tabs with the slots on the spool housing figure P.
The spool 2 is mounted for rotation about axis 3 in spool housing or frame 4.
Figure 29 - Replacing spool cover onto spool housing.
Press the spool plate into the line spool housing Fig . 36.
You'll also be interested in:
Examples of using Housing
Show more
Improved land and housing policies implemented
Housing systems for other livestock categories
Proportion of makeshift housing at the national level
Examples of using Spool
Show more
Put a spool of thread on the spool pin
Check to see if the spool is properly wound
Move spool holder to remove both spools
