Examples of 'spray angle' in a sentence
Meaning of "spray angle"
Spray angle refers to the width or spread of a liquid or gas spray pattern when it is dispersed from a nozzle. It is commonly used in industries such as agriculture, automotive, and manufacturing to optimize the efficiency and coverage of spraying operations
How to use "spray angle" in a sentence
Basic
Advanced
spray angle
Spray angle can be adjusted at the nozzle.
Improper spray tip size or spray angle.
A nozzle with a narrow spray angle produces large droplets.
The first two digits are the spray angle.
The spray angle has become wider at the nozzle.
The color of the tip shows what spray angle it is.
Narrow spray angle liquid fuel atomizers for combustion.
These distances may vary according to the spray angle of the nozzle.
The spray angle produced by the nozzle was very narrow.
The condition for coverage is satisfied by a nozzle with a defined spray angle.
The increase in spray angle reduction is measured as the polymer dose is doubled.
This value depends on the spray pattern distribution and the spray angle.
The spray angle is assumed to remain constant throughout the entire spray distance.
The effectiveness of the high-pressure jet depends to a great extent on the spray angle.
The spray angle may further be controlled by appropriate adjustment of the secondary airflow.
See also
These dimensions can affect the resulting particle size, velocity and spray angle of aerosol.
This will determine the spray angle when the spray gun is held in a level position.
Example 12 This examples demonstrates the effect of different polymers on spray angle.
The spray angle determines the effectiveness of the high-pressure spray.
Indeed, Bauer teaches the art of adjusting spray angle as well as uniformity.
Spray angle ( included angle of the cone of water being discharged ) will be a nominal 60 degrees.
In the illustrated embodiment, the spray angle can be about 15 degrees.
Fig . 17 shows a photograph of spray nozzle operating with a low spray angle.
The minimum nozzle spray angle is 15 degrees.
Use nozzles with a 60 spray angle at the recommended pressure of 12 bar.
The nozzle 104 is of a conventional type and has a spray angle of approximately 45 degrees.
The atomizer slit determining the spray angle in the dryer was set at -2.2 mm.
The atomizer slit determining the spray angle in the dryer was adjusted to -2.0 mm.
You'll also be interested in:
Examples of using Spray
Show more
Do not spray electrical apparatus and wiring
Do not immerse the spray gun in solvent
Do not spray during fog or a temperature inversion
Examples of using Angle
Show more
The angle can be read on the scale jj
Only place he can angle a shot at you
The angle would not make sense
