Examples of 'starter cord' in a sentence
Meaning of "starter cord"
A starter cord is a rope or cord used to manually start an engine or motor, typically found on small machines and equipment such as lawnmowers, chainsaws, or generators. It is pulled or yanked to initiate the engine's ignition and start the machinery
How to use "starter cord" in a sentence
Basic
Advanced
starter cord
Pull the starter cord three times.
Check the starter and starter cord.
Pull the starter cord to start the engine.
Changing a broken or worn starter cord.
Extend starter cord periodically to check its condition.
Slowly pull the starter cord once.
The starter cord snatches back.
Always rewind the starter cord slowly.
Give the starter cord handle a strong pull until the.
Never shorten the starter cord.
Pull the starter cord handle slowly until.
Make a secure knot in the end of the starter cord.
Now pull the starter cord quickly.
Your local service agent can replace a damaged starter cord.
Quickly tug on the starter cord to remove ex.
See also
Pull the starter cord in a quick continuous motion to start the engine.
Insert and fasten a new starter cord in the pulley.
Pull the starter cord slowly till you feel resistance.
Insert and fasten a new starter cord to the pulley.
Pull the starter cord press the decompression valve first.
Do not completely pull out the starter cord risk of breakage.
Pull the starter cord until resistance is felt.
Care must be exercised when replacing the return spring or the starter cord.
Never pull the starter cord fully out.
Watch for a spark in the tester window as you pull the starter cord.
Do not pull the starter cord out completely.
Grasp the starter handle and start the engine by pulling briskly on the starter cord.
Pull the starter cord four to five times.
Then grip the starter handle with your right hand and pull the starter cord.
Return the starter cord gently to the starter housing.
See instructions under heading Changing a broken or worn starter cord.
Never wrap the starter cord around your hand.
If that is the case, start the machine manually using the starter cord.
Pull on the starter cord until you feel resistance.
Holding these two handles together firmly, firmly hold the starter cord handle.
Never twist the starter cord around your hand.
Depress lock-out button and squeeze throttle trigger fully, pull the starter cord.
Never pull the starter cord to its full length.
Starter cord kickback ( rapid retraction ) can result in bodily injury.
Insert and secure a new starter cord in the starter pulley.
Pull the starter cord slowly several times in order to coat the internal components.
Do not pull the recoil starter cord all the way out.
Pull the starter cord lightly until you feel resistance and then.
A bigger chainsaw engine will have a greater starter cord tension that will require more effort.
Return the starter cord gently to prevent damage to the starter housing.
Before operating, unplug the starter cord from the engine.
Place the starter cord on the side of the generator.
Attention, Do not let the starter cord fly back.
Always pull starter cord slowly until resistance is felt.
S Check the condition of the starter device, the starter cord and the tensioning spring.
You'll also be interested in:
Examples of using Cord
Show more
Pull the power cord out completely
The cord must be in the pole rabbet
I broke his spinal cord using my buttocks
Examples of using Starter
Show more
Starter fluid or firelighters should not be used
Then pull recoil starter briskly again
Oem starter rebuild kits for atv
