Examples of 'stop lever' in a sentence
Meaning of "stop lever"
A 'stop lever' is a control mechanism or device that when activated, halts or stops the operation of a machine, equipment, or process. It serves as a safety feature to prevent accidents, malfunctions, or damage by quickly disengaging the mechanism or bringing it to a complete stop
How to use "stop lever" in a sentence
Basic
Advanced
stop lever
Put the motor stop lever on drive.
This model also introduces an ambidextrous slide stop lever.
Depress stop lever on engine speed control.
Spring for centre second stop lever.
Allow the stop lever to catch again.
Operating lever for rotor stop lever.
Put the motor stop lever on neutral.
Stop lever plate.
The balance stop lever can be swingable.
Release the engine stop lever.
Put the motor stop lever on neutral see label.
Automatic train stop lever.
The slide stop lever also acts as an ejector blade.
Alarm wheel yoke stop lever spring.
Stop lever stud.
See also
There is an emergency stop lever inside the control system.
Stop lever spring.
Centre second stop lever.
The balance stop lever swings with the change of weight of belts stored.
Foot for operating lever spring Foot for hour recorder stop lever.
Make sure the engine stop lever is in the operating position.
To stop the engine, release the engine stop lever.
Rotor stop lever.
Carrying out a safety test on the engine start / stop lever.
Alarm stop lever.
This function is assumed by a modified power-reserve wheel that controls a stop lever.
Strike stop lever.
A bag stop lever mounted on a shaft for rotary movement about an axis ;.
Balance stop lever.
To disengagethe drive system and stop the engine, completely releasethe engine stop lever.
Slide stop lever.
To disengage the drive system and stop the engine, completely release the engine stop lever 1.
Lightly press the stop lever and gently pull out the magazine cover.
Before you start the engine, operate the engine stop lever several times.
Rotate the stop lever 180 in a clockwise direction while pulling it toward you.
During opening, hand work the limit stop lever in the opening direction.
Set the desired table width and stop the table extension with the stop lever 52.
In particular, never secure the blade stop lever to the handlebar e.g. by tying it.
The stop lever is placed automatically in the " START " position by a spring.
IMPORTANT, Before you start the engine, operatethe engine stop lever several times.
Release the engine stop lever ( 1 ) and the engine and the blade will automatically stop.
To disengage only the drive system, release the engine stop lever ( 1 ) approximately two inches.
Stop lever for table extension 14.
Press the left or right blade stop lever ( 1 ) to the handlebar and hold.
It is itself subjected to the action of a start and stop lever 305.
Release the engine stop lever lever A, Figure 6.
Loosen the mitre clamping knob ( 8 ) and lift the positive stop lever 7.
If the product is equipped with an engine stop lever ( D ), hold the engine stop lever.
Apply the stop lever ( 19 ) and pull the log pusher back onto the magnet.
Incidentally, the turning manipulation for the stop lever 47 is restrained by another limit bolt 49.
You'll also be interested in:
Examples of using Lever
Show more
Do not lift lever during brewing cycles
Lever can be adjusted to a different lever angle by
Open the lock lever to unlock footplate
Examples of using Stop
Show more
They would not stop killing sharks
Next stop menswear and sporting goods
That is not gonna stop me from trying
