Examples of 'stop plate' in a sentence
Meaning of "stop plate"
A stop plate is a flat or curved metal plate that is used to restrict or regulate the movement of an object. It is commonly used in machinery or mechanical systems to create a stopping point or limit the range of motion
How to use "stop plate" in a sentence
Basic
Advanced
stop plate
Front stop plate for tightening assembly.
Screw fastening the front stop plate.
Clean the stop plate with a damp cloth.
Push it towards the stop plate.
Rear stop plate of tightening assembly.
The final position is determined by the stop plate.
We can not stop plate motions.
Tighten the screw against the stop plate.
Push the stop plate forward up to the housing and tighten.
Only one side of their opening is limited by a stop plate.
Replace the stop plate by following the instructions in the opposite direction.
There is again no stop plate.
Depth stop plate is pulled out for non-through cuts.
Tighten the thread forming screw into the stop plate.
Follow the procedure for the stop plate type in your lever assembly.
See also
Install the reach adjust pushrod through the stop plate.
How to remove the stop plate for cleaning?
Tapped blind hole for screw fastening front stop plate.
Tap the stop plate with your hand to switch ‘ OFF.
Such flotation can be restrained in one axial direction by the stop plate.
It applies only when there is no side stop plate between cells i and j.
The slices are guided outwards vÃa the gap between the knife and the stop plate.
For adjustment of groove depth, pull out depth stop plate and rotate depth stop screw.
The bent panel is bent over the anvil with one side touching the stop plate.
We can not stop plate motions . And therefore we can not stop earthquakes.
A screw may removably mount the cable stop plate to the head.
A stop plate 42 is mounted on the rear of the.
Do not raise the Stop plate.
The stop plate can be movable vertically according to double arrow f111.
Use the carriage to press the food against the stop plate 1.
Remove the rear floorboard stop plate ( a ) from the transom.
Unscrew lower die and hold-down appliance with stop plate.
Figure 15 is a top view of a stop plate for the extensible lock.
The first jaw terminates at its distal end with a stop plate 6.
The carriage 31 supports a stop plate 37 which can extend in a general vertical direction.
To rotate the miter gauge beyond these stops, flip the stop plate up.
FIG . 4 is a perspective view of a stop plate in accordance with the invention ;.
The movement of the valve member is halted by its engagement with the stop plate 31.
Pull the depth stop plate out away from the saw head see Figure 17.
At the end of the core travel, the core hits a stop plate on the rewinder.
Tap the stop plate with your hand or thigh to switch OFF Fig 15.
The rail extends distally through a stop plate 36.
The stop plate includes a dog 48.
And rests against the forward stop plate of cell 32.
Rotate the stop plate ( 1 ) towards the front position.
Turn the control button counter clockwise so that the stop plate ( 1 ) can be removed.
A stop plate 80 extends down from the slide block toward plate 70.
FIG . 8 is a view showing the manner in which a stop plate is attached ;.
Optionally included is a stop plate 86 which may be identical to the stop plate 76.
The assembly 4 therefore does not comprise a mobile stop plate 32.
