Examples of 'stopper pin' in a sentence
Meaning of "stopper pin"
stopper pin: A stopper pin is a small device or pin used to secure or hold something in place, often by preventing it from moving or sliding. It is commonly used in machinery, equipment, or other mechanical systems to ensure stability or safety
How to use "stopper pin" in a sentence
Basic
Advanced
stopper pin
Ered position by pulling the stopper pin.
Stopper pin is only for carrying and storage.
Do not remove the stopper pin before installing the base.
Stopper pin is for carrying and storage purposes.
Always hold the handle when releasing the stopper pin.
Stopper pin which locks the cutter head down is.
Release the handle from the raised position by pulling the stopper pin.
Stopper pin is for carrying purposes only and not for.
Remove the stopper and stopper pin by pulling the rubber rim of the stopper.
Stopper pin is for carrying purposes only and not for any cutting operations.
Insert new upper knife into the groove of the knife holder and stopper pin.
The stopper pin can not be turned with the tool head at.
Squeeze cap and stopper together and slide the lever off the stopper pin.
Release the stopper pin by lowering the handle slightly and pulling the stopper pin.
After adjusting the kerf boards, release the stopper pin and raise the handle.
See also
The stopper pin can not be turned with the tool head at fully lowered position.
At this time, turn the knob counterclockwise slightly and the stopper pin can be released.
Stopper pin is for carrying and storage purposes only and not for any cutting operations.
Lowered position by pulling the stopper pin and turning it to the angle of 90.
B Stopper pin Prevents the valve stem from turning 90 or more.
Ered position by pulling the stopper pin and turning it to the angle of 90.
The jutting part 24 is prevented from coming out by a stopper pin 25.
Alternatively, the stopper pin may comprise a substantially cuboid pin body.
This stopper 44 comes in contact with the stopper pin 5a of the solenoid 5.
Release the stopper pin by lowering the handle slightly and pulling the stopper pin . Fig . 3.
Thus, the biasing member 5 will push out the stopper pin 3 from the pin housing 1.
A stopper pin 75 which is mounted on the engine case 12 is inserted into the restricting hole 77.
Note, The stopper and stopper pin are tightly fit and need not be separated.
A stopper pin 94 which is mounted on the engine case 11 is inserted into the restriction hole 93.
The stopper pin planted on the engine case 11 is inserted into the restriction hole 87.
You'll also be interested in:
Examples of using Pin
Show more
Pin absolute pressure at venturi inlet kPa
Stick the pin around the strut
Pin baste to secure them for sewing
Examples of using Stopper
Show more
Lower the stopper and tighten it well
Liquid may accumulate in the stopper cap
Insert carriage stopper in one of six positions
