Examples of 'strength measurements' in a sentence
Meaning of "strength measurements"
Strength measurements: The process of determining or quantifying the physical power, potency, or intensity of something, often with regard to materials, structures, or individuals. This phrase is commonly used in the fields of engineering, fitness, sports, and science to assess and compare levels of strength
How to use "strength measurements" in a sentence
Basic
Advanced
strength measurements
Conduct acoustic target strength measurements on krill.
Tensile strength measurements are an average of three samples.
The first is by signal strength measurements.
Tensile strength measurements at high temperature.
They are based on tensile strength measurements.
The signal strength measurements form a pattern.
The concretes were also submitted to compressive strength measurements.
All grip strength measurements are averaged.
The following conditions were used in the melt strength measurements.
Grip strength measurements showed a significant increase also.
Structural property of the foam is also characterized by compressive strength measurements.
Lap shear strength measurements were observed and recorded.
Very often a neighboring base station having satisfactory signal strength measurements can not be located.
The strength measurements were made in the web region.
These base stations provide the signal strength measurements to the BSC responsible for handoff.
See also
Impact strength measurements were carried out on the films obtained.
The 1st two are based on signal strength measurements.
Tensile strength measurements.
All of these values are for in-use tensile strength measurements.
Green strength measurements are performed by using a standard tensile testing machine.
Complete data taken in conjunction with the field strength measurements shall be submitted, including.
Undrained shear strength measurements were carried out on board after each sediment core was collected.
Table 1 lists the combustion rate and the mechanical strength measurements defined below,.
Signal strength measurements determine the ability of an observing receiver to track received positioning signals.
The mobile station reports to the base station the corresponding pilot strength measurements from frequency f2.
Pilot searches and pilot strength measurements are not performed while on the target frequency.
TABLE 2 Results of the breaking strength measurements.
All tensile strength measurements were measured in accordance with standard ASTM tests.
The details of the compositions and the tensile strength measurements are shown in Table 2.
Compressive strength measurements of concretes obtained after hardening were carried out according to standard NF.
Average values for 3 to 4 tensile strength measurements were recorded.
Impact strength measurements gave values very near or better than pure CPVC.
The results of the flexural strength measurements are given in Table 8.
Melt strength measurements were conducted on a Goettfert Rheotens attached to an Instron capillary rheometer.
Average values for about 3 to 4 tensile strength measurements were determined.
Zero-span strength measurements were shown to follow a normal distribution.
Table 1 presents the participants ' anthropometric variables, age and strength measurements.
Green strength measurements were taken 15 minutes after heat sealing of the laminates.
This follows from the results of Charpy impact strength measurements at 23°C.
Signal strength measurements are periodically made as doors 20 move to their fully open position.
Internal bond strength Internal bond strength measurements were made in accordance with DIN EN 319.
Bending strength measurements were performed according to the ISO 5616 standard, by using the Lhomargy apparatus.
Means for transmitting pilot strength measurements to the base station ( 106 ).
Grip strength measurements were performed at study days 0 and 20.
All hot tack data is reported in strength measurements of Newtons / inch ( N / in ).
The tensile strength measurements were performed on cured epoxy samples immersed in saline for 7 days.
The resulting the peel strength measurements are reported in Table 6.
The gel strength measurements were taken with the aid of a Carri-Med C.S. rheometer.
Pre - and post-leg strength measurements were made using a Biodex isokinetic dynamometer.
Lap shear strength measurements ( in Nmm2 ) were observed and recorded.
You'll also be interested in:
Examples of using Measurements
Show more
All inch measurements are converted from millimeters
Do not perform capacitance measurements on live circuits
All measurements will be based on interior dimensions
Examples of using Strength
Show more
Your inner strength should be even stronger
That can only be achieved through strength
We ask for strength to surpass all understanding
