Examples of 'strength values' in a sentence
Meaning of "strength values"
Strength values: These are principles or beliefs that guide individuals in making decisions and taking actions based on their personal strengths and virtues. Strength values can include traits such as honesty, integrity, and perseverance, and are often used to navigate ethical dilemmas or challenges in various aspects of life
How to use "strength values" in a sentence
Basic
Advanced
strength values
Cooling strength values for individual coolants.
Smaller waves product higher strength values.
Higher peel strength values correspond to a better adhesiveness.
The same applies to break strength values.
Adhesion strength values are reported for sterilized paste.
These estimates are compared with published target strength values.
The strength values were normalized by the mass of each individual.
This permitted normalization of the strength values of the samples.
The peel strength values were determined according to the following procedure.
It is surprising that very high strength values are achieved despite this.
Overconsolidated clays display distinct peak and residual strength values.
The average tensile strength values of the pellets were then calculated.
The structure of the interleaf resulted in higher peel strength values.
The dry and wet shear strength values were all very good.
Products comprising continuous fibres achieve the highest stiffness and strength values.
See also
All grip strength values obtained were normalized against mouse body weight.
Back analyses was made for calibration of the strength values obtained by geomechanical classifications.
Higher peel strength values in this test are indicative of a better paint adherence.
For greater strip thickness the tensile strength values are to be agreed upon.
These compressive strength values significantly exceed the related compressive strength requirements.
This would be done to increase the toughness and strength values of the fired whitewares.
Both dry and wet strength values and elongation values are improved.
For strip with high deformation stress lower tensile strength values may be agreed.
The isometric muscle strength values were not proportional to the age of the participants.
The compression force was adjusted according to the crushing strength values in rotary press.
The measured strength values were evaluated on the basis of the following evaluation standards.
Tensile strength ratios were calculated using tensile strength values of conditioned and unconditioned samples.
The ultimate strength values are determined by measuring the tensile strength of the material.
The concretes described in this patent however do not have sufficient compressive strength values.
Direct comparison of strength values is problematical in view of the different ash levels involved.
This difference in size of neoformed calcite could explain the differences in compressive strength values.
The measured strength values are strengths obtained after the formation of the tube beams.
The distribution function is calculated with a starting point from measured field strength values.
The computer model provides relative strength values to quickly screen different plate shapes.
The shaped bodies according to the invention achieve maximum compressive strength values in this range.
The field strength values are continually updated after the setting sequence of each cycle.
EPMATHMARKEREP This formula is used to adjust the strength values to a common basis density.
The high strength values verifies that one has a composite material with very well integrated fibers.
The samples tested and their wet burst strength values are set forth in Table VII.
Strength values similar to those of starboard Kraft Top.
The bursting strength and tensile strength values traditionally express the dry strength of the paper.
These included, determination of target strength values for.
The shear strength values are shown in Table III.
The ALGf and ALDf samples had the closest strength values to that of the MREF.
Modulus and tear strength values also significantly improve with increasing diamine B level.
Table 2 shows the maximum compressive strength values.
However, improved strength values were obtained.
Bedding characteristics of non-cohesive soils - determination of shear strength values.
Lap shear strength values are also reported in table 2.
In addition, considerably improved strength values are usually achieved.
You'll also be interested in:
Examples of using Strength
Show more
Your inner strength should be even stronger
That can only be achieved through strength
We ask for strength to surpass all understanding
Examples of using Values
Show more
The measured values shall be plotted on a graph
Date and time revert to default values
Carrying values and estimated fair values
