Examples of 'stress concentration' in a sentence
Meaning of "stress concentration"
In engineering or structural analysis, this phrase refers to the phenomenon where stress is significantly increased or concentrated at specific points or areas within a material or structure. It suggests that certain regions undergo higher levels of stress compared to the surrounding areas, which can potentially lead to structural failure or damage
How to use "stress concentration" in a sentence
Basic
Advanced
stress concentration
This avoids stress concentration at the corners.
The fillets are typically regions of high stress concentration.
Stress concentration and therefore as crack nucleation sites.
Crack with high stress concentration.
No stress concentration on the structure.
Such protrusions may create stress concentration points.
Stress concentration in a tubular joint.
Should be strictly controlled to avoid contact stress concentration.
Simulations indicated high stress concentration in the crack locations.
The stress concentration scale is shown on the lower left.
The latter zones correspond to stress concentration in use conditions.
The variation of wall thickness is selected to support local stress concentration.
Geometric stress concentration factor.
This makes it possible to considerably limit the stress concentration.
Reduced stress concentration.
See also
In addition the threads provide regions of high stress concentration.
Analysis of stress concentration.
Designed for optimized contact and reduced stress concentration.
Specimen geometry produces a stress concentration in a small área of the specimen.
Special attention must be given to this área to avoid stress concentration.
Cracks and chipping caused by stress concentration were discovered at multiple locations.
In this proposal special care is need to avoid undesirable stress concentration points.
The calculation of the stress concentration is performed by the finite element technique.
Such discontinuities in modulus can also lead to stress concentration and cracking.
This aspect reduces stress concentration and improves the life of the drum.
Stress concentrators are define as entities that raise the stress concentration factor.
The stress concentration área of this compressor slider is treated in partial heat treatment.
The notch was provided so as to simulate stress concentration at a screw thread.
The stress concentration factors are generally useful only in the linear elastic range.
The keels can be staggered to avoid stress concentration in the bone.
The highest stress concentration occurs at the outer edges of the rib or blocks.
The free surface around the aperture created an área of significant stress concentration.
You will compare the stress concentration at the hole with known theoretical results.
The region around the slot or slots especially tends to be subject to stress concentration.
Another advantage is that the stress concentration through the thickness of the laminate is minimized.
Mark off can cause a local weakening of the composite caused by stress concentration.
Stress concentration factors for the respective coupling may be obtained from these models.
The stitch thread that keeps laminas together is responsible to introduce stress concentration sites.
The local stress concentration is greater than the lap shear capability of the adhesive.
The leading edge of the cuts in the core thread act as stress concentration points.
This connecting fillet prevents stress concentration and prevents the sidewalls from bending in operation.
Dimensional transitions between a smooth cylindrical shaft and a coupling cause stress concentration in the shaft.
This arrangement will reduce the stress concentration in the lower área of the end portion.
Dynamic load tests confirmed the analytically determined high strain gradients and stress concentration factors.
This limits the risks of the appearance of stress concentration regions and incipient bending regions.
They also acknowledged that they knew about the flaw that had caused the stress concentration.
This arrangement avoids forming stress concentration points previously associated with the use of discontinuous spacers.
This hemispherical, arcuate contour reduces any stress concentration.
Therefore, stress concentration can be mitigated at the end.
Material with higher hardness could have provided stress concentration and a site for crack initiation.
You'll also be interested in:
Examples of using Stress
Show more
Stress can trigger migraines quite easily
Very good for stress you know
Stress has always affected your hormones
Examples of using Concentration
Show more
We will get some concentration camp clothes
Concentration of economic power in the supply chain
There is a higher concentration of blood at the knee
