Examples of 'stress concentrations' in a sentence
Meaning of "stress concentrations"
stress concentrations - Refers to areas within a material or structure where stress levels are higher than in surrounding areas
How to use "stress concentrations" in a sentence
Basic
Advanced
stress concentrations
Dynamic stress concentrations in unidirectional carbon fibre composites.
The curves increase strength by decreasing stress concentrations.
The stress concentrations are thus minimized.
This provides tremendous stress concentrations at these areas.
The stress concentrations in the corner zone are therefore limited.
In unloaded equilibrium condition substantially no stress concentrations occur.
Stress concentrations are also reduced.
The device minimizes stress concentrations and is easily realized.
Stress concentrations due to structure irregularities were observed on finished parts.
Deeper cutting flutes will also create stress concentrations.
This results in stress concentrations and possible shaft failure.
This reduces friction and further avoids stress concentrations.
Stress concentrations are preferably minimised by curving the zones of connection.
This in turn will give less stress concentrations in the tablet.
Stress concentrations around the holes were reduced by adding a fourth bolt.
See also
When theses materials dilate it induces stress concentrations and gradients.
Hereby are stress concentrations along the boundary área reduced.
This continuous connection ensures that local stress concentrations are prevented.
Such stress concentrations are a primary cause of failure in poorly designed splines.
The edges of the hole are chamfered to prevent local stress concentrations.
Stress concentrations are generally controlled or minimized by maintaining the largest radii possible.
A suitable design is such that the mechanical stress concentrations are minimised.
This will reduce stress concentrations and peel forces even further.
This type of current density in the beam minimizes mechanical stress concentrations.
This is due to an increase in residual stress concentrations in thick material cross sections.
Stress concentrations were inducing cracks in the cord depending on the number of flexure cycles.
This produces localised stress concentrations that may cause cracking or flaking.
This may cause the vertebra to crack due to high stress concentrations.
This relieves stress concentrations and thereby improves reliability of the crimp.
The internal profile was smooth to avoid stress concentrations and flow disturbances.
The impact of tires moving over a pavement marker creates bending stresses and stress concentrations.
Such notches provide stress concentrations that may negatively influence fatigue life.
High stresses at the surface may be compounded by stress concentrations such as rough spots.
The stress concentrations in the SPD over each of the fasteners are also visible.
Force spreading is improved by the rounded shape of the bends averting stress concentrations.
This is necessary to reduce stress concentrations when pallets are stacked one on the other.
Several methods are envisioned whilst bearing in mind the desire to avoid stress concentrations.
The maximum stresses and peak stress concentrations shall be kept within safe limits.
The circular grooves weaken the roll necks and provide areas of potentially damaging stress concentrations.
The existence of bubbles may lead to stress concentrations when the fiber is handled subsequently.
In this manner, it is possible to avoid detrimental stress concentrations.
In this manner, stress concentrations are eliminated.
The implant also features rounded corners to eliminate stress concentrations in the implant.
As a consequence of this, stress concentrations are avoided or at least significantly reduced.
As a result, ceramic materials are particularly sensitive to the formation of stress concentrations.
Transition piece design must not attract high stress concentrations at key structural locations.
The shape of the partition 92 is approximately hemispherical to prevent mechanical stress concentrations.
The maximum stresses and peak stress concentrations where necessary ;.
Main fragility in timber structures occurs in the connections, because to stress concentrations.
For example, as expected, stress concentrations are greatest near the sealing faces of the ridges.
You'll also be interested in:
Examples of using Concentrations
Show more
Plasma concentrations are similar in males and females
Found in highly elevated concentrations in top predators
Concentrations in volume per cent on wet basis
Examples of using Stress
Show more
Stress can trigger migraines quite easily
Very good for stress you know
Stress has always affected your hormones
