Examples of 'strip thickness' in a sentence
Meaning of "strip thickness"
strip thickness: The width or measure of how thick a strip of material, such as metal or paper, is. It is often a critical factor in various manufacturing or mechanical processes
How to use "strip thickness" in a sentence
Basic
Advanced
strip thickness
Almost any desired strip thickness can be attained.
Slag control is required for uniform composition and strip thickness.
Minimum strip thickness.
This reduced the variations of rolling force and of steel strip thickness.
For greater strip thickness the tensile strength values are to be agreed upon.
Bending ability for strip thickness.
The reduction in strip thickness will therefore correspond essentially to the degree of elongation achieved.
The distance from the wheel is selected based on the strip thickness being cast.
Preferably the strip thickness is greater than or equal to about 4 mm.
The nozzle edge must be closer to the substrate than the strip thickness.
The actual cooling rate depends on the strip thickness and the mould cooling ability.
Average strip thickness throughout the world is about 3 millimeters.
Eccentricities in the casting rolls can lead to strip thickness variations along the strip.
The strip thickness has been designated T. The wave length of the sine-wave is designated L.
The amount of opening is dependent upon the desired strip thickness and substrate speed.
See also
Figure48, Deviations from strip thickness and final rolling temperature.
Bending radius, minimum 10 times of the strip thickness.
The minimum bend radius ( mbr ) as a function of strip thickness ( t ) is then reported as mbr / t.
A for the link between equivalent viscosity and fluid strip thickness ( a=1 ).
For thermoplastics a V-0 pass for a 1.5 mm strip thickness is considered to be a good pass.
Normal total hot rolling height reduction of the strip thickness is > 95 %.
Marked reduction in the variation in strip thickness see Fig . 7.
You'll also be interested in:
Examples of using Strip
Show more
At both sides a strip should be folded over
Strip search and body cavity search
Dig or fill in a strip of shoreline or river bed
Examples of using Thickness
Show more
Minimum recommended thickness of zinc vs thickness of steel
Thickness of tanks made with double walls
Reduction of wall thickness and additional protection
