Examples of 'strokes per minute' in a sentence
Meaning of "strokes per minute"
Strokes per minute: This phrase is used in various contexts, but it is most commonly associated with measuring the speed or frequency of a repetitive movement, particularly in sports or musical activities. It usually refers to the number of full cycles or movements completed in one minute
How to use "strokes per minute" in a sentence
Basic
Advanced
strokes per minute
The number of paddle strokes per minute.
Strokes per minute may be adjusted when the tool is running or stopped.
Stroke speed is usually expressed as a number of strokes per minute.
The strokes per minute can be adjusted just by turning the adjusting dial.
The line in the middle indicates the number of strokes per minute.
The strokes per minute may be adjusted with the speed control dial.
The speed control dial controls the maximum strokes per minute.
The strokes per minute vary by the conditions of battery cartridge and shear blades.
It may be operated at any speed from zero strokes per minute to full speed.
SPM Strokes per minute Do not use in wet conditions.
Manufacturers typically run the molding machines at sixty to ninety strokes per minute.
The respiratory rate was set at 99 strokes per minute with a tracheal pressure of 6 cm water.
The percussion drill achieves a high stroke rate of tens of thousands of strokes per minute.
Length of stroke 32 mm Strokes per minute High speed.
Sfpm surface feet safety alert per minute symbol SPM strokes per minute.
See also
Sharp blades and strokes per minute (SPM).
When running at maximum speed, it could achieve eleven strokes per minute.
Setting SPM rating strokes per minute.
Double insulated reciprocation per minute SPM Strokes per minute.
Min per minute IPM impacts per minute SPM strokes per minute sfpm surface feet per.
The pistons have a stroke of about 175mm and reciprocate at approximately 120 strokes per minute.
Number on adjusting dial Strokes per minute.
Mechanical presses are faster than their hydraulic counterparts up to 50 strokes per minute.
Sfpm surface feet safety alert per minute symbol SPM strokes per minute visible radiation.
Both our finalists have exactly the same number of strokes, that is 498 strokes per minute.
Safety alert symbol / min strokes per minute.
It comes with specially encoded VR content and gives you up to 180 strokes per minute.
The mill operates at 60 strokes per minute.
The operating rates of the presses are typically from 10 to 60 strokes per minute.
The pump runs at 60 strokes per minute.
For cycling, cadence refers to the number of pedals strokes per minute.
A Amps / min Revolutions or Strokes per minute.
High performance with up to 150 cutting strokes and up to 80 punching strokes per minute.
It oscillates about 30 strokes per minute.
The result: Almost all animals survived ventilation with 12 strokes per minute.
Accessories must be rated for at least the recommended strokes per minute speed of the.
During the incubations, the plates and flasks were shaken at 300 strokes per minute.
Increased stroke frequency, i.e. more strokes per minute.
The cartridger operates normally at 30 strokes per minute.
By the end of five minutes you should be at 30 strokes per minute.
It was designed to run at between 12 and 16 strokes per minute.
A turret punch can achieve 600 strokes per minute.
Presses can run at speeds of up to 100 strokes per minute.
Aim for a stroke rate of between 24 and 30 spm strokes per minute.
Increase in return fluid-flow rate ( with no pump strokes per minute increase ) ;.
This Dewalt saw ensures the maximum of 2800 strokes per minute.
You'll also be interested in:
Examples of using Minute
Show more
Would not take a minute to turn them on
The minute display will start flashing
We have got about a minute before it blows
Examples of using Strokes
Show more
Priox did not cause strokes in any of them
Four strokes of red paint on her behind
Make a few test strokes on the paper
