Examples of 'surface burner' in a sentence
Meaning of "surface burner"
This phrase refers to a specific component of a stove or cooktop that generates heat for cooking
How to use "surface burner" in a sentence
Basic
Advanced
surface burner
Typical surface burner flame at highest setting.
Hold match at base of desired surface burner.
Adjusting the surface burner or grille flame.
Surface burner grates porcelain on cast iron.
Adjust the height of surface burner flames.
Adjust surface burner flame size so it does not.
Be smaller or larger than the surface burner.
Remove the surface burner control knob.
Heat an unopened container on the surface burner.
Each surface burner has a spark ignitor.
Very large or yellow surface burner flames.
Verify surface burner components are assembled correctly.
Place cooking utensil on surface burner.
Left rear surface burner and grate.
Place cooking utensil on center of surface burner grate.
See also
Surface burner flame lifts off ports.
Always place a pan on a surface burner before turning it on.
Surface burner making popping noises.
Remove the surface burner grates.
Surface burner flame burns half way around.
To clean the surface burner heads.
If surface burner flame lifts off the ports.
Push in and turn a surface burner knob to the.
Surface burner makes popping noises.
When cleaning around the surface burner use care.
Surface burner flame is yellow in color.
Heat an unopened container on the surface burner or in the ovens.
The surface burner heads are removable.
Hold a lighted match to the desired surface burner head.
Check the surface burner and grille flames.
Use extreme caution when manually lighting a surface burner.
Check the surface burner and grill flames.
Pay particular attention to the area underneath each surface burner.
Surface burner ports may be clogged.
Do not use spray cleaners on the surface burner control panel.
Surface burner clicks during operation.
Proper relationship of utensil to the surface burner will also improve efficiency.
Surface burner flame only part way around burner cap.
Under no circumstances are the surface burner assemblies to be taken apart for cleaning.
Surface burner components and caps are not assembled correctly and level.
They could ignite and burn you if they touch a surface burner.
The surface burner should ignite when gas is available to the burner.
If the ignitor is wet or damaged the surface burner will not light.
Position surface burner heads on top of the surface burner manifolds as shown at right.
All burner ignitors will spark when any surface burner is turned on.
Always turn off the surface burner controls before removing cookware.
Select utensils having flat bottoms large enough to cover the surface burner flame.
The two surface burner assemblies are secured in place during transportation with screws.
The unit will heat the front surface burner and the bridge.
The surface burner assembly can be removed to clean the burner box area.
You'll also be interested in:
Examples of using Burner
Show more
The burner lids are not correctly positioned
Test each rangetop burner in this fashion
Each burner has its own igniter
Examples of using Surface
Show more
An uneven surface increases the risk of overturning
Where ϑ is the measured test surface temperature
All feasible surface and subsurface ECVs
