Examples of 'surface film' in a sentence
Meaning of "surface film"
This term typically refers to a thin layer or coating of a substance on the surface of another material. It is commonly used in chemistry and physics
How to use "surface film" in a sentence
Basic
Advanced
surface film
Reject water with an oily surface film.
No surface film that can wear over time.
It is believed that the surface film is a monolayer film.
This surface film is then transferred and superimposed on the substrate.
Amorphous surface film.
The surface film coefficient depends on the weather and the environment.
The pad incorporates a pattern designed to take up a thin surface film of flakes.
A properly cured surface film had formed after the radiation step.
Techniques for the extraction and analysis of the pollution surface film.
The surface film includes a substrate and conductive carbon nanotubes grown on the substrate.
The coating is thereby further protected against oxidation by a surface film of aluminium.
The blends exhibited a poor surface film effect which had poor flow out and orange peel.
The reference plywood was formed from untreated plywood and a surface film.
The drop is desirably shaken leaving a thin surface film of the component on the rod.
Preferably the oxidised surface layer is in the form of a continuous surface film.
See also
A special advantage with a permeable adhesive is that a surface film will not block absorption completely.
They will use their barbed rostrum to spear their prey in the surface film.
Surface Film covered.
Chromium combines with oxygen to form an adherent surface film that resists oxidation.
Surface Film coverd.
This insulating layer can advantageously be in silicon oxide and the surface film in silicon.
In carbonate-buffered solutions, the surface film is very difficult to remove electrochemically.
Alternatively use may be made of chemical reagents which can attack the smooth surface film.
When the bubble is blown, the surface film tends to contract.
In the case of polyester, moisture remains on the fiber as a surface film.
A matte surface film according to any preceding claim, which is biaxially oriented.
This makes it possible to obtain a much denser surface film of R residues.
Second, the surface film of cured resin cures to a high gloss finish.
Surface tension measures the strength of the water 's surface film.
In particular, the conductivity of the surface film decreases exponentially with decreasing thickness.
The depth of the trenches is therefore equal to the thickness h of the surface film 20.
These become concentrated in the surface film and in marine sediment, especially estuarine mud.
The composition of claim 1 characterised in that said carbon coating is a smooth surface film.
After polishing, the articles may contain a surface film or residue causing a hazy appearance.
The surface of the hardened topping is smooth, flat and hard, without surface film.
The accural determining both thickness of surface film and freeze point tempe, was very good.
By default, the invention enables the manufacture of undecorated tubular bodies incorporating a surface film.
The thickness of the surface film 30 is as desired.
The pre-react adduct is then mixed with the remaining components of the surface film composition.
Nor the upper surface film 3 was damaged.
The OCP slightly increased after 1 day, indicating some change has occurred in the surface film.
On this occasion, the surface film 6 builds up again on the surface coating 4.
Study of the physicalchemical characteristics of the surface film formed on the steel ;.
Then, the upper surface film 3 and the lower surface film 4 were bonded and cut.
A decorative film as set forth in claim 3, wherein said surface film is a polyvinyl chloride.
Examination of surface film formed on the pickling line IV.3.
Figure 7 illustrates the defects which result from using a surface film having a high viscosity ;.
In other words, the upper surface film 3 is allowed to have a longitudinal margin of 2H.
It would take a force of 72 dynes to break a surface film of water 1 cm long.
Colliquefying the retained powder coating to form a contiguous surface film ( 60 ).
You'll also be interested in:
Examples of using Film
Show more
The film has not started yet
We are finishing the film about that invention
Film can be applied without disconnecting pump
Examples of using Surface
Show more
An uneven surface increases the risk of overturning
Where ϑ is the measured test surface temperature
All feasible surface and subsurface ECVs
