Examples of 'surface of the workpiece' in a sentence
Meaning of "surface of the workpiece"
Surface of the workpiece: This phrase refers to the outer or exposed area of a piece of material or object that is being worked on or manipulated. It indicates the visible or accessible part of the workpiece
How to use "surface of the workpiece" in a sentence
Basic
Advanced
surface of the workpiece
Saw from the back surface of the workpiece.
The surface of the workpiece must meet the following requirements.
Tacts as great part of surface of the workpiece as possible.
The surface of the workpiece is melted in the vicinity of the line.
Polishing is the process of finishing the surface of the workpiece.
The contact surface of the workpiece must be fl at for thicknessing.
This produces a planar área below the surface of the workpiece.
Do not allow the surface of the workpiece to become too hot.
The resist layer is located on a top major surface of the workpiece.
Wood to the back surface of the workpiece and cut through this sandwich.
Large ball styli act as mechanical filters on the surface of the workpiece.
A cover that covers the upper surface of the workpiece discharge conveyor is provided.
This machine use abrasive segments to grind the surface of the workpiece.
These bubbles collect on the surface of the workpiece and interfere with passivation.
Area of the imprint of the electrode measured at the surface of the workpiece.
See also
Lower the unit onto the surface of the workpiece and apply slight pressure.
Metal is thus removed ion by ion from the surface of the workpiece.
The surface of the workpiece must be clean to ensure good contact with the torch.
Vapours of the solvent evaporating from the surface of the workpiece are captured.
It represents the surface of the workpiece along the section at the projected laser line.
Roughness may be also measured by comparing the surface of the workpiece to a known sample.
As the surface of the workpiece vaporizes, it forms a surface plasma jet.
The method continues with contacting the abrasive article to a surface of the workpiece.
Of scrap wood to the back surface of the workpiece and cut through this sandwich.
Use this gauge to set the mortise height relative to the surface of the workpiece.
This laser beam strikes the surface of the workpiece and melts the powder locally.
The forming tool therefore preferably bears against the outer surface of the workpiece.
During abrading, the surface of the workpiece was flooded with water.
Always grind with a small angle between grinding disc and the surface of the workpiece.
During sanding, the surface of the workpiece was flooded with water.
Therefore, this comprises the upper surface of the workpiece.
The surface of the workpiece and the angle should now be as shown in figure F5.
A tangent to a machine path and a normal to the surface of the workpiece define a vibration plane.
The surface of the workpiece and the angle should now be as shown in figure H5.
During the passivation pulses the surface of the workpiece 2 is passivated locally.
Always position the blade guard approximately 10 mm above the surface of the workpiece.
In certain non-limiting embodiments, the surface of the workpiece may be cooled to room temperature.
A thin coupling liquid film is interposed between the shoe 27 and the surface of the workpiece.
This provides additional lighting on the surface of the workpiece for operation in lower-light areas.
Conversely, when the polarity is reversed, heavier ions move towards the surface of the workpiece.
Perfect turning surface of the workpiece . Can be offered together with tool holders.
In a subsequent step, the film provided on the surface of the workpiece is removed.
The outside surface of the workpiece 2 has non-processed surface areas 11 and a laser sculpted center portion 12.
After this stage, only defects in the surface of the workpiece contain penetrant.
The moving electrode may include a current-applying roller configured to roll on a surface of the workpiece.
The epoxy 12 is preferentially removed from the surface of the workpiece by plasma etching.
In certain non-limiting embodiments, the surface coating may completely cover the surface of the workpiece.
The assembly maintains gauge head 10 in contact with the surface of the workpiece portion.
Upon sufficient quenching, a surface hardness layer 90c ' will be formed on the surface of the workpiece.
This shortens the time required to abrade the surface of the workpiece 102.
You'll also be interested in:
Examples of using Workpiece
Show more
Check that the workpiece is properly supported
Place the saw shoe on the workpiece
And support the workpiece to a stable platform
Examples of using Surface
Show more
An uneven surface increases the risk of overturning
Where ϑ is the measured test surface temperature
All feasible surface and subsurface ECVs
