Examples of 'workpiece' in a sentence
Meaning of "workpiece"
workpiece (noun) - a piece of material being worked on or manipulated during a manufacturing process
Show more definitions
- The raw material or partially finished piece that is shaped by performing various operations.
How to use "workpiece" in a sentence
Basic
Advanced
workpiece
Check that the workpiece is properly supported.
Place the saw shoe on the workpiece.
And support the workpiece to a stable platform.
Then apply pressure to cut the workpiece.
Use clamps to support workpiece whenever practical.
The workpiece must have a flat surface.
Do not force the workpiece on the machine.
The workpiece must be fixed securely in place.
Use clamps to support workpiece whenever possible.
Hold workpiece firmly on the sander table.
Properly secure your workpiece before drilling.
The workpiece only needs to be clamped once.
Loss of control of a workpiece can cause injury.
The workpiece should be moved to and fro.
This could damage a workpiece or cause an injury.
See also
The workpiece is still at a very high temperature.
Tip of blade strikes workpiece or inside of pipe.
Prepare workpiece by fastening it in a completely safe manner.
Always secure the workpiece in the vise.
Check workpiece geometry and sort parts.
Do not bend or twist workpiece while feeding.
A direct workpiece measuring system is offered as well.
Draw a desired cutting line on the workpiece.
Insert the workpiece in the miter base.
Signal to register stylus contact with workpiece.
Check the workpiece for foreign bodies.
Use clamps or a vice to hold the workpiece.
Verify that the workpiece is securely grounded.
Hold saw up so blade clears the workpiece.
Support the workpiece near the cut.
Allow the blade to penetrate the workpiece.
Support the workpiece adequately at all times.
For cuts parallel to a straight workpiece edge.
Position the workpiece so that it is securely supported.
Where possible clamp the workpiece to a bench.
Press the workpiece contact against a workpiece.
Push the saw through the workpiece.
Secure the workpiece to prevent it from moving.
Operator applying too much pressure to workpiece.
Place router on workpiece inside pattern to be routed.
Connect the earth clamp to the workpiece.
Always ensure the workpiece is well supported.
The workpiece becomes hot during grinding.
Always secure the workpiece in such a manner.
Lower the handle to cut the workpiece.
Secure the workpiece with the vise.
Use the vice to secure the workpiece.
Avoid creep of workpiece and gauge by firm.
Place a straight edge onto the workpiece.
The rotating workpiece can cause injury.
