Examples of 'surface resistivity' in a sentence
Meaning of "surface resistivity"
surface resistivity - This phrase refers to the measurement of a material's ability to resist the flow of electric current across its surface. It is commonly used in the field of electrical engineering and materials science
How to use "surface resistivity" in a sentence
Basic
Advanced
surface resistivity
Surface resistivity is also referred to as sheet resistance.
Fully integrated surface resistivity instrument.
Surface resistivity test on standard cylinders.
The desired reduction of surface resistivity was also achieved.
The thickness range also has an impact on the surface resistivity.
R is the surface resistivity of the sample.
Each test piece was subjected to an extended surface resistivity test.
The surface resistivity is a measure of resistivity of thin films having uniform thickness.
A hard stackable film having good surface resistivity was obtained.
Surface resistivity and charge decay time were the most important measurements.
Treated substrates are then examined for surface resistivity values.
It is noted here that the surface resistivity is the inverse of the surface conductivity.
The conductivity of the printed material is determined by measuring the surface resistivity.
Usually they are added to change the surface resistivity of such objects only.
The surface resistivity usually varies through a wide range with the humidity.
See also
This conductive additive can be used to decrease the surface resistivity of the sheet.
The surface resistivity of the inner layer was then measured using the above method.
The conductive additive may be used to reduce the surface resistivity of the sheet.
The surface resistivity of the composition in example 2 was determined as follows,.
The antistatic properties of polymers were determined by surface resistivity and static decay time.
The results of the surface resistivity testing are given in units of ohms / square.
The Resipod provides a variety of features that are unique in a concrete surface resistivity instrument.
The uncoated polyester film had a surface resistivity out of range of the measuring instrument.
Surface resistivity testing provides an indication of a material 's ability to dissipate static charges.
Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials.
The surface resistivity and volume resistivity are shown on the following table,.
In the instant case, it is the surface resistivity.
High surface resistivity encourages charging, whereas low resistivity causes the charge to dissipate.
A very good electrical conductivity of said layer of which the surface resistivity is,.
A black deposit was obtained with a surface resistivity greater than 20 megohms per square.
This enhances the electrical conductivity and / or lowers the surface resistivity.
Consequently, materials having same surface resistivity might have different decay rate.
The hard particles are silane-coated in order to influence the surface resistivity.
Also the so called surface resistivity is surprisingly high compared to non-polar ethylene polymer.
Improvements in or relating to high-TC superconducting units having low contact surface resistivity.
Thus, surface resistivity tends to shoot up in the winter when the relative humidity drops.
The antistatic and / or antifouling property of a polymer can be measured by its surface resistivity.
It has also been shown that surface resistivity has a non-linear behavior with electric field.
This invention relates to high-Tc superconducting units having low contact surface resistivity.
The lower the surface resistivity the better is the anti-static property of the additive.
The UV-curing effected by the lamps resulted in a hard white film having good surface resistivity.
Generally, a more conductive material with lower surface resistivity will show better antistatic properties.
The impregnated surface layer imparts dielectric resistance, a low dissipation factor, and very high surface resistivity.
The surface resistivity results are shown in Table 2.
In a variation, the coating has an electrical surface resistivity of less than 1 ohm / square.
The surface resistivity obtained was on the order of several tens of Ω / . quadrature.
Preferably, said sacrificial protective coating has an electrical surface resistivity of less than 1 ohm / square.
When measuring surface resistivity in the following examples, the Department of Defense Standard was used.
The term conductive in the present specification means a surface resistivity of 5 x 106 Ohms cm or less.
The Surface Resistivity ( SR ) test is a much quicker and easier test for estimating concrete permeability.
You'll also be interested in:
Examples of using Resistivity
Show more
The resistivity due to these collisions is small
A material having low resistivity is a good conductor
Resistivity andhall effect of germanium at low temperatures
Examples of using Surface
Show more
An uneven surface increases the risk of overturning
Where ϑ is the measured test surface temperature
All feasible surface and subsurface ECVs
