Examples of 'switch cover' in a sentence
Meaning of "switch cover"
A switch cover refers to a protective covering used to shield electrical switches or buttons from damage or accidental operation. It is commonly used in households and workplaces to prevent unauthorized use or tampering with the switches
How to use "switch cover" in a sentence
Basic
Advanced
switch cover
Remove thumbscrew from bin switch cover.
Remove the switch cover with a small coin.
Fitting and removing the switch cover.
Now the light switch cover is ready to be used.
The handle cover portion further includes a switch cover.
Archive wall switch cover chromi.
The switch cover can be opened easily by sliding it upwards.
Locate air pressure switch cover and.
Remove the switch cover and tighten the spring.
Also available as complete kit including the ignition switch cover.
Or use some prophylactic switch cover such as this.
Remove switch cover from right end of air vent.
Secure the switch into the switch box and install the gasket and switch cover.
The light switch cover can be screwed to the door.
Remove the paper roll and the DIP switch cover.
See also
The switch cover covers a surrounding of the operating switch.
Reattach the pressure switch cover and tighten the screw.
Switch cover plates; apparatus connectors.
You can install your light switch cover in just a few minutes.
Wattstopper DSW series wall switches fit behind industry standard decorator-style switch cover plates.
The retracting switch cover prevents accidental starting of the router.
Reattach the service PCB switch cover.
Remove the red switch cover and turn off the switch.
After setting the switches, reinstall the code switch cover with screw.
Align the bosses inside switch cover with the cutouts on the glass.
Press the red button ( 0 ) or the red button of the yellow switch cover.
Remove the switch cover from the transmitter save the two screws.
Remove the service PC-board switch cover 1 screw.
The enclosed power switch cover keeps the power switch from being pressed accidentally.
Finally, the light switch cover.
Press the power switch cover onto the power switch compartment until it clicks.
It's a light switch cover.
The enclosed power switch cover ensures that the power switch is not pressed accidentally.
Press the red button ( O ) or the red button of the switch cover.
Do not remove the limit switch cover until the power supply has been disconnected.
Fixing screw x1Rear cover Switch cover.
Printer Power switch cover Ribbon cassette.
To stop it, press the OFF ( O ) button or the switch cover.
The Retracting Power Switch Cover will slide back to its original position.
Screw the service PC-board switch cover back on 1 screw.
The switch cover 410 serves as an actuator for the switch.
Loosen the 2 fixing screws of the switch cover to remove the switch cover.
The right switch cover 64 covers the surrounding of the starter switch 71.
Extending outward from and integrally formed with the switch cover outer wall 180 is a link fastener 192.
Close the switch cover ( 6 ) after setting the switches.
If an accident occurs with the power switch cover attached, unplug the power cord immediately.
With switch cover 22 covering the switch 20, the motive power 3 is prevented from being activated.
If an accident occurs with the power switch cover attached, unplug the AC cable immediately.
The left switch cover 63 covers the surrounding of the hom switch 72 and the flasher switch 73.
Note, The Retracting Power Switch Cover ( 7 ) prevents accidental starting of the router.
You'll also be interested in:
Examples of using Cover
Show more
Remove the battery cover by sliding it downward
Cover and keep warm up to one hour
Unscrew the bulb cover by turning anticlockwise
Examples of using Switch
Show more
The floating switch is blocking in automatic operation
Opera never survived the switch to electric
Set the switch to the correct position
