Examples of 'switch handle' in a sentence
Meaning of "switch handle"
Switch handle: The physical part of a switch that is used to control its operation, typically by moving it up or down. It is commonly found in various devices and machinery to turn them on or off
How to use "switch handle" in a sentence
Basic
Advanced
switch handle
Press switch handle to upper part of handlebar.
Blade wrench is stored in the switch handle.
Setting the switch handle and holding handle.
Never lift tool by holding switch handle.
The switch handle will be locked in that position.
Quickly close the isolator switch handle.
Switch handle is human engineered for maximum convenience.
Always use the side handle and switch handle.
Grasp the switch handle and pull the saw head.
Do not lift the miter saw by the switch handle.
The switch handle and the other hand on the front handle.
Always make sure that the switch handle is locked in.
Unpack the isolator switch open it and remove the isolator switch handle.
Carrying the machine by the switch handle will cause misalignment.
The motor is suspended independently from the switch handle.
See also
Lifting the machine by the switch handle will cause misalignment.
The adjusting wheel is on the top side of the switch handle.
Hold switch handle with one hand and top handle with the other.
Do not lift the saw by the switch handle alone.
Grasp the switch handle with one hand and the spade grip with the other hand.
Control the cutting edge of the wheel with the switch handle.
Do not extend pole Saw switch handle above shoulder height.
Hold the tool firmly with one hand on the switch handle.
Do not extend Power Scrubber switch handle above shoulder height.
Turn the switch handle ( 2 ) clockwise to the front in the position.
Do not attempt to do this yourself as the switch handle is not customer serviceable.
Hold the tool 's switch handle and the loop handle firmly with both hands during operation.
Hold the tool by both side grip and switch handle during operations.
Switch handle must be held in position 1 and 2, it return automatically to position 0.
Press the lock button and rotate the switch handle to left or right fully.
Hand on the switch handle ( 4 ) and the other on the trimmer body 1.
If tool meets heavy obstruction, release clutch handle, and place switch handle in OFF position.
Yes, it is the switch handle we want to look at.
Stopping the machine, Let go of the bottom switch handle B.
Slowly move the switch handle toward the fence, completing the cut.
An extension cord retainer ( figure 10 ) is built into the switch handle that prevents the cord.
Remedy - Press switch handle to upper part of handlebar.
The adjusting wheel is on the top side of the switch handle A - minimum, G - maximum.
Grasp trigger switch handle 7 and bail handle 6 firmly.
Hold the machine firmly at the supporting handle ( A ) and switch handle B.
Possible cause - Switch handle not pressed down.
An extension cord retainer ( 15 ) is built into the switch handle.
Do not use power On / Off switch handle or power cord to lift your saw.
An extension cord retainer ( 14 ) is built into the extension pole switch handle.
When tool is free, place switch handle in OFF then FOR position to advance cable.
Switch handle mounting positions Fig . 2.
Pull out the mains plug . The switch handle ( 1 ) can be mounted parallel to the.
Switch on the REMS Krokodil 125 at the switch handle.
Grasp trigger switch handle ( H ) and bail handle ( F ) firmly.
You'll also be interested in:
Examples of using Switch
Show more
The floating switch is blocking in automatic operation
Opera never survived the switch to electric
Set the switch to the correct position
Examples of using Handle
Show more
You can barely handle one woman
Handle circuit boards only by the edges
To reattach the handle on the opposite side
