Examples of 'switch is open' in a sentence
Meaning of "switch is open"
switch is open: Refers to an electrical circuit in which the switch is in the off position, interrupting the flow of electricity. It is commonly used in technical or engineering contexts
How to use "switch is open" in a sentence
Basic
Advanced
switch is open
The switch is open during pulse generation.
The high temperature limit switch is open.
Low pressure switch is open due to loss of refrigerant.
The second factor is the pin voltage when the switch is open.
The switch is open when the contact is not established.
The intake and exhaust valves are closed and the electrical contact switch is open.
The switch is open when the throttle is resting in idle position.
The sight glass allows the user to verify that the switch is open or closed.
The switch is open when the throttle rests on it closed throttle position.
The injector emits when the switch is open to facilitate the required emission.
Electric current can not flow between them ; the switch is open.
This switch is open when the body is in the up position for dumping refuse.
Electrical current can not flow between them ; the switch is open.
When the switch is open the controller is in AUTO mode.
When the user is not holding the device, the switch is open.
See also
High-pressure switch is open in heating mode.
Below this value, the current does not pass and the switch is open.
Low-pressure switch is open due to low seawater and / or low return air temperatures.
If the reading is overrange - The switch is open.
Otherwise, the switch is open and the SISO network decoder is not activated.
FIG . 2 is a simplified diagram of a first embodiment when the controlled switch is open.
Because the switch is open for a long time, the initial condition I0 is equal to zero.
In normal operation, there is no connection between COM and NO switch is open.
Thus, the controlled switch is open only if both,.
The switch is open when the implant angle is 7 °.
Verification that the Sail Switch is open 4.
High-pressure switch is open ( in cooling ) due to improper seawater flow.
In the off state, the switch is open.
As a result, in the absence of a predetermined event, the main switch is open.
In this position, the switch is open.
It is assumed that if a duty cycle a bst =1 is used, the corresponding switch is open.
As of this moment with the machine stopped the switch is open (infinity).
A blade 70 for each pole serves to ground the terminal 66 when the section switch is open.
The roll 12 and the movable contact 14, respectively, are in a position where the switch is open.
The SMT-770 will return to the user settings when this switch is open.
You'll also be interested in:
Examples of using Switch
Show more
The floating switch is blocking in automatic operation
Opera never survived the switch to electric
Set the switch to the correct position
Examples of using Open
Show more
Open both hot and cold faucets
We are gonna open our own bowling alley
Open the valves all the way
