Examples of 'switch is pressed' in a sentence
Meaning of "switch is pressed"
switch is pressed ~ indicates the action of pushing or activating an electrical or mechanical switch
How to use "switch is pressed" in a sentence
Basic
Advanced
switch is pressed
When the switch is pressed in the module is on.
The pad is on when this switch is pressed in.
When the switch is pressed in it is turned on.
The group is on when the switch is pressed in.
The parking sensor switch is pressed while the parking sensor is in operation.
Tool does not respond when trigger switch is pressed.
When this switch is pressed and.
Unit does not operate even if the switch is pressed.
The activating switch is pressed and the air vent rises.
Nothing happens when the power switch is pressed.
When the switch is pressed in the EQ is on.
The filter is turned on when the switch is pressed in.
If the AUTO switch is pressed while the.
Appliance will not start when speed switch is pressed.
If the switch is pressed again, the hardtop resumes opening.
See also
The battery remaining switch is pressed.
If the switch is pressed down fully, the device runs at maximum speed.
The display will be switched each time the switch is pressed.
When the switch is pressed or it does not work normally, the engine does not crank.
Steam will escape as long as the steam switch is pressed down.
When limit switch is pressed during welding, machine stops traveling and arc turns off automatically.
The motor does not start when the start switch is pressed.
When the control switch is pressed the tool will then run at the pre-selected speed.
The minutes advance while the lower side of the switch is pressed.
When the SHAPE switch is pressed in, this control is active.
The hours advance while the upper side of the switch is pressed.
A / C switch is pressed even if the fan is off.
Drive clutch lever is squeezed or auger clutch switch is pressed when starting.
A / C switch is pressed while the air conditioner is turned off.
The unit can not be turned on though the power switch is pressed.
As the trigger switch is pressed in, the strokes-per-minute continue to increase.
The process may be performed when a recovery button or switch is pressed or selected.
When this switch is pressed the selcted low pass x-over frequency is multiplied by 10.
One led flashing mode is realized each time the switch is pressed.
When this switch is pressed the selcted high pass x-over frequency is multiplied by 10.
The mode changes as follow each time the seat warmer switch is pressed.
It also illuminates when the DSC OFF switch is pressed and TCS / DSC is switched off.
Maximum speed is reached in about three seconds after the power switch is pressed in.
When the " " side of the power switch is pressed in, the power consumption of the.
The system changes to the interconnection mode automatically if the windshield defroster switch is pressed.
If any of the INFO switch is pressed.
Trigger Switch is pressed down, the faster the drill will run 4.
Nothing is displayed when the Set switch is pressed.
When this switch is pressed for at least 2 seconds, the MAIN MENU appears.
Unit does not operate when POWER switch is pressed.
The OFF / CAN switch is pressed once.
Will not turn on when the POWER switch is pressed.
When the switch is pressed in ( ), phantom power is on.
This LED lights up when the mains switch is pressed.
When the switch is pressed in ( ), the pad is on.
You'll also be interested in:
Examples of using Switch
Show more
The floating switch is blocking in automatic operation
Opera never survived the switch to electric
Set the switch to the correct position
Examples of using Pressed
Show more
He seems to have pressed pause or retired altogether
Pressed shirt and nice clean hands
A loudspeaker is pressed against the trunk high up
