Examples of 'switch signal' in a sentence
Meaning of "switch signal"
switch signal: a term related to electrical engineering or transportation, referring to a signal that controls the switching of tracks or circuits
How to use "switch signal" in a sentence
Basic
Advanced
switch signal
Free switch signal box.
This code will set if the brakelight switch signal is not received.
A switch signal is then sent.
Confirmation signal and operation error signal switched off main switch signal always remains on.
The limit switch signal can also be used for further control functions.
The DOWN rest state is characterised by the closed Down limit switch signal.
A track switch signal near Marseille.
Becky coordinate communications, and will hand switch signal.
Even some devices that transmit the switch signal ( preamplifiers and integrated preamplifiers ) lack this marking.
For example, the charge protection signal may be an adjustable periodic pulse charging switch signal.
To the controller 10 may also be inputted a main switch signal and a handlebar switch signal.
Therefore, a simple switch signal may simply be a change ( a jump ) in the crossover frequency fx.
As soon as the operator closes the application, the switch signal changes to not active 0.
The remainder forms switch signal V14 and is present at the negative input of comparator 52.
When the application is open, the switch signal is active 1.
See also
When the ignition switch signal is OFF ( No ), the program returns to step 1.
It is a multi-stage switch signal.
When the ignition switch signal is ON ( Yes ), the program proceeds to step 3.
Such a change of the voltage is detected by the switch signal detection circuit 443.
The first selection switch signal Com 1 rises and gets established at HV ( 5 V ).
In particular, the timer resets itself whenever the switch signal 204 turns off the motor.
Hook switch input Hook switch signal High = Off hook, Low = On hook.
The modified coding mode information 108 ' comprises the corresponding switch signal.
The switches are controlled by the Tx / Rx switch signal received by the transceiver.
And etc. Reader: After read card information, send switch signal to main controller.
This causes the contact pad 534 ( dome ) to collapse and the switch signal to be generated.
The additional logic 42, 44 which utilizes the gate switch signal GS is described below.
You'll also be interested in:
Examples of using Signal
Show more
Give me a signal when you want me to start
You have to use one signal at a time
Signal strength indicating connection between units
Examples of using Switch
Show more
The floating switch is blocking in automatic operation
Opera never survived the switch to electric
Set the switch to the correct position
